AFMS

Clean Air Solutions

HEPA/ULPA Filters

  • Absolute™ CM
    Advantages
    • Compact design concept
    • Very high efficiency
    • Incinerable
    • Scannable
    Application: HEPA filter for standard applications
    Type: Box Filter
    Frame: MDF
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS): H13(≥99,95%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 800 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 70ºC
    RH. max: 100%
    Remarks: All filters scan tested acc. EN 1822
    Other options available: Galvanized frame
    Click for More
    Absolute™ DG
    Advantages
    • Rated airflow capacity of up to 3400 m³/h 610×610 (H13)
    • Halogen free
    • Low outgassing
    • Flexible in the dimensions
    • Lightweight and installation friendly
    • VDI 6022
    • Scannable
    Application: HEPA-Filter for high air flows
    Type: Box Filter
    Frame: ABS
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS): H13(≥99,95%), H14(≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 1000 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 70ºC
    RH. max: 100%
    Remarks: All filters scan tested acc. EN 1822:2009
    Click for More
    Absolute™ VG XL, XXL
    Advantages
    • High air flow
    • Low pressure drops
    • Optimized, compact construction
    • High efficiency
    • Halogen free
    • VDI 6022
    • Applicable up to 6000 m³/hair flow
    Application: Efficiency final filtration in air conditioning systems, housings, and diffusers
    Type: V-Bank Box Filter
    Frame: ABS
    Gasket: EPDM
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS): E10(≥85%), E11(≥95%), E12(≥99,5%), H13(≥99,95%), H14(≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 600 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: FKB, 4N, CamSafe2
    Click for More
    Absolute™ VE XL, XXL E10-E12
    Advantages
    • High air flow
    • Applicable up to 5000 m³/h air flow
    • Low pressure drops
    • Ergonomic handle
    • Optimize the air filtration in clean rooms
    Application: HEPA filter for standard applications
    Type: V-Bank Box Filter
    Frame: Galvanised steel
    Gasket: EPDM
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS): E10(≥85%), E11(≥95%), E12(≥99,5%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 600 Pa
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: FKB, FKB/D, CamBox
    Remarks: Special versions on request (e.g., stainless steel frame or high temperature version 120ºC)
    Click for More
  • Absolute™ VE XL, XXL H13-H14
    Advantages
    • High air flow
    • Applicable up to 4000 m³/h air flow
    • Low pressure drops
    • Ergonomic handle
    • Optimize the air filtration in clean rooms
    • Individual tested acc. to EN 1822:2009
    Application: Very high efficiency final filtration in air conditioning systems, housings, and diffusers.
    Type: V-Bank Box Filter
    Frame: Galvanised steel
    Gasket: EPDM
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Synthetic resin
    EN 1822 (Efficiency @ MPPS): H13(≥99,95%), H14(≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 600 Pa
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: FKB, FKB/D, CamBox
    Remarks: Special versions on request (e.g., stainless steel frame or high temperature version 120ºC)
    Click for More
    Absolute™ VGHF
    Advantages
    • Compact HEPA filter with header frame
    • Incinerable
    Application: High efficiency final filtration in air conditioning systems and industrial processes.
    Type: V-Bank Filter
    Frame: ABS; header frame, 25mm
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS): E11(≥95%), H13(≥99,95%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 1000 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Max. final pressure drop: 500 Pa
    Temperature max: 70ºC
    RH. max: 100%
    Remarks: All filter scan-tested acc. EN 1822:2009 and individually packed in PE-foil. Other editions on request
    Click for More
    Absolute™ V ProSafe XL, XXL
    Advantages
    • Recommended for food beverage and life science industries
    • Hygienic product acc. to VDI6022
    • Microbial inert components acc. to ISO846
    • Food contact approved acc.to EC1935:2004
    • Free of harmful chemical components: halogen-free, bisphenol-free, formaldehyde free, phthalate-free
    • Tested resistance to decon and cleaning procedures
    • High air flow, low pressure drops
    • Individual test certificate acc. to EN1822:2009
    • Optimizing waste management:
    - Compactable
    - Incinerable
    - lightweight
    • Ideal for CREO energy optimization
    Application: EPA/HEPA final filtration for air conditioning systems of sensitive process industries like life science or food and beverage.
    Type: V-Bank Box Filter
    Frame: ABS
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS): E11(≥95%), H13(≥99,95%), H14(≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 600 Pa
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access filter frames. Terminal housings and safe change systems
    Click for More
    Absolute™ 1D
    Advantages
    • High quality glass fibre media
    • High mechanical strength
    • Rigid design
    • High efficiency
    • High dust holding capacity
    Application: HEPA filter for standard applications
    Type: Box Filter
    Frame: Plywood
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Aluminium
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS):  E13(≥99,95%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 600 Pa
    Temperature max: 110ºC
    RH. max: 100%
    Mounting/Frames: FKB, FKB/D, CamBox
    Remarks: All filter tested acc. EN 1822:2009. Other editions on request
    Click for More
  • Megalam MD14, MX14, MG14 -1PU
    Advantages
    • Compliant to VDI 6022
    • Microbial inert components acc. to ISO 846
    • Tested for Food Contact acc. to EC 1935:2004
    • Free of bisphenol-A, phthalate and formaldehyde
    • Chemically resistant to inactivation and cleaning procedures
    Application: HEPA filter for clean rooms and LAF benches.
    Type: Pleated Panel
    Frame: Anodized aluminium
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Grille, Upstream: Expanded metal painted (RAL 9010)
    Grille, Downstream: Expanded metal painted (RAL 9010)
    EN 1822 (Efficiency @ MPPS): H14(≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: MD: 500 Pa, MX: 600 Pa, MG: 800 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Click for More
    Megalam MD15, MX15, MG15 -1PU
    Advantages
    • Compliant to VDI 6022
    • Microbial inert components acc. to ISO 846
    • Tested for Food Contact acc. to EC 1935:2004
    • Free of bisphenol-A, phthalate, and formaldehyde
    • Chemically resistant to inactivation and cleaning
    procedures
    Application: ULPA filter for clean rooms and LAF benches.
    Type: Pleated Panel
    Frame: Anodized aluminium
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Grille, Upstream: Expanded metal painted (RAL 9010)
    Grille, Downstream: Expanded metal painted (RAL 9010)
    EN 1822 (Efficiency @ MPPS): U15(≥99,9995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: MD: 500 Pa, MX: 600 Pa, MG: 800 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 70ºC
    RH. max: 100%
    Remarks: Individually scan-tested acc. EN 1822:2009 with protocol and packed in PE-foil. Compliant with ProSafe** requirements. Other editions on request
    Click for More
    Silent Hood filter MD14-HL
    Advantages
    • H14 compact filter-diffuser for clean room
    • Ready to install
    • Quiet: LW = 35 dB
    • Laminarity +/- 20%
    Application: Final filtration for clean rooms.
    Type: Hood Filter
    Frame: Anodized aluminium
    Gasket: Neoprene
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Grille, Downstream: Expanded metal painted (RAL 9010)
    EN 1822 (Efficiency @ MPPS): H14 (≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 500 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 70ºC
    RH. max: 100%
    Connection: Spigot with outer diameter 160 mm, 250 mm or 315 mm depending on the model
    Remarks: Individually scan-tested acc. EN 1822:2009 with protocol and packed in PE-foil. Other editions on request
    Click for More
    Megalam MD14, MX14, MG14-GEL
    Advantages
    • Compliant to VDI 6022
    • Microbial inert components acc. to ISO 846
    • Tested for Food Contact acc. to EC 1935:2004
    • Free of bisphenol-A, phthalate, and formaldehyde
    • Chemically resistant to inactivation and cleaning procedures
    Application: HEPA filter for clean rooms and LAF benches.
    Type: Pleated Panel
    Frame: Anodized aluminium
    Gasket: Silicone Gel
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Grille, Upstream: Expanded metal painted (RAL 9010)
    Grille, Downstream: Expanded metal painted (RAL 9010)
    EN 1822 (Efficiency @ MPPS):  H14(≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: MD: 500 Pa, MX: 600 Pa, MG: 800 Pa
    Temperature max: 70ºC
    RH. max: 100%
    Remarks: Individually scan tested acc. EN 1822:2009 with protocol and packed in PE-foil. Compliant with ProSafe** requirements. Other editions on request
    Click for More
  • Megalam MD15, MX15, MG15 -1PU

    Advantages
    • Compliant to VDI 6022
    • Microbial inert components acc. to ISO 846
    • Tested for Food Contact acc. to EC 1935:2004
    • Free of bisphenol-A, phthalate, and formaldehyde
    • Chemically resistant to inactivation and cleaning
    procedures
    Application: ULPA filter for clean rooms and LAF benches.
    Type: Pleated Panel
    Frame: Anodized aluminium
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Grille, Upstream: Expanded metal painted (RAL 9010)
    Grille, Downstream: Expanded metal painted (RAL 9010)
    EN 1822 (Efficiency @ MPPS): H15(≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: MD: 500 Pa, MX: 600 Pa, MG: 800 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 70ºC
    RH. max: 100%
    Remarks: Individually scan-tested acc. EN 1822:2009 with protocol and packed in PE-foil. Compliant with ProSafe** requirements. Other editions on request

    Click for More
    Megalam Fabsafe MD, MX, MG
    Advantages
    • Developed for safe use in microelectronic cleanrooms and equipment
    • Ideal for nanoparticle filtration (100 nm)
    • High dust holding capacity
    • 100% filter scan test for guaranteed performance
    • Filter scanned according to EN1822, IEST or other required standards
    • Individual efficiency test reports
    • Zero leak guarantee
    • No organic outgassing from test aerosol
    • Low outgassing adhesives and gasket (no organic flame retardant)
    • Manufactured and packed in cleanroom environment
    Application: Microelectronic cleanrooms and equipment. Nanoparticle filtration
    Type: Pleated Panel
    Frame: Anodized aluminium
    Gasket: EPDM
    Media: Glass fibre
    Separator: Hot Melt Separator Technology
    Sealant: Polyurethane
    Grille, Upstream: Expanded metal painted
    Grille, Upstream: Expanded metal painted
    Grille, Downstream: Expanded metal painted
    Temperature max: 70ºC
    RH. max: 100%
    Test: 100% individual scan test according to EN1822, IEST RPCC007 or required standard
    Test aerosol: PSL. Oil free
    Fire rating: UL900
    Remarks: Many frame options and dimensions are available on request
    Click for More
    Absolute™ 1FRK
    Advantages
    • 99,95% at MPPS with DEHS
    • Temperature resistant up to 350°C
    • High air flow
    • Ready to install
    • Quiet: LW = 35 dB
    • Laminarity +/- 20%
    Application: Protection for clean processes at high temperature
    Type: Box Filter
    Frame: Stainless steel
    Gasket: Glass fibre
    Media: Glass fibre
    Separator: Aluminium
    Sealant: Ceramic
    EN 1822 (Efficiency @ MPPS): H13(≥99,95%)
    Max. final pressure drop: 500 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 350ºC
    RH. max: 100%
    Remarks: Please note installation and assembly instructions! Due to the different thermal expansion coefficients of the individual filter components the ceramic potting may form cracks during the tempering process. At operating temperature (350 ºC) these filters have an overall efficiency of 99,97% at 0,3 μm, leakages are possible
    Click for More
    Absolute™ 1FRK-V
    Advantages
    • ≥99,95% at MPPS with DEHS
    • Temperature resistant up to 350ºC
    • High efficiency
    • High mechanical strength
    • High air flow
    Application: Protection for clean processes at high temperature
    Type: High temperature filter
    Frame: Reinforced stainless steel
    Gasket: Glass fibre
    Media: Glass fibre
    Separator: Aluminium
    Sealant:Ceramic
    EN 1822 (Efficiency @ MPPS):  H13(≥99,95%)
    Max. final pressure drop: 500 Pa
    Rec. final pressure drop: 2x Initial pressure drop
    Temperature max: 350ºC
    RH. max: 100%
    Remarks: Please note installation and assembly instructions! Due to the different thermal expansion coefficients of the individual filter components the ceramic potting may form cracks during the tempering process. At operating temperature (350 ºC) these filters have an overall efficiency of 99,97% at 0,3 μm, leakages are possible
    Click for More
  • Absolute™ 1FRSI
    Advantages
    • ≥99,95% at MPPS with DEHS
    • Temperature resistant up to 250ºC
    • Constant efficiency
    • High mechanical strength
    • High air flow
    Application: Protection for clean processes at high temperatures
    Type: High temperature filter
    Frame: Stainless steel
    Gasket: Silicone
    Media: Glass fibre
    Separator: Aluminium
    Sealant: Silicon HT
    EN 1822 (Efficiency @ MPPS): H13(≥99,95%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 500 Pa
    Rec. final pressure drop: 2x Initial pressure drop
    Temperature max: 250ºC
    RH. max: 100%
    Remarks: Please note the installation and assembly instructions!

    Click for More
    Absolute™ D-Pyro H13
    Advantages
    • H13 in all Temp. ranges ≥99,95% at MPPS with DEHS
    • Temperature resistant up to 350oC
    • Patented construction
    • Zero tempering
    • ProSafe + REACH compliance
    Application: HEPA filter protection for clean processes at high temperature
    Type: High temperature filter
    Frame: Stainless steel
    Media: Glass fibre
    Separator: Stainless steel
    Sealant: Geopolymer Matrix
    EN 1822 (Efficiency @ MPPS): ≥99,97% at 0,3μm, ≥99,95% at MPPS, leak free ≥ 200 cycles
    Max. final pressure drop: ≥ 700Pa
    Temperature max: 350ºC
    Remarks: ISO 5 under all production steps. Please note installation and assembly instructions! Other editions on request (with gasket, or sizes)
    Click for More
    Absolute™ D-Pyro H14
    Advantages
    • H14 in all Temp. ranges ≥99,995% at MPPS with DEHS
    • Temperature resistant up to 350oC
    • Patented construction
    • Zero tempering
    • ProSafe + REACH compliance
    Application:HEPA filter protection for clean processes at high temperature
    Type: High temperature filter
    Frame: Stainless steel
    Media: Glass fibre
    Separator: Stainless steel
    Sealant: Geopolymer Matrix
    EN 1822 (Efficiency @ MPPS): ≥99,997% at 0,3μm, ≥99,995% at MPPS, leak free ≥ 200 cycles
    Max. final pressure drop: ≥ 700Pa
    Temperature max: 350ºC
    Remarks: ISO 5 under all production steps. Please note installation and assembly instructions! Other editions on request (with gasket, or sizes)
    Click for More
    GigaPleat XPC/XPH
    Advantages
    • Reduced waste through reusable housing
    • Up to 2 media types can be combined into the same filter
    • Compact solution
    • High media cleanliness
    • Exchangeable panels
    Application: Clean room recirculation air and clean room make up air
    Type: Box Filter
    Frame: Stainless steel
    Sealant: Polyurethane
    Temperature max: 40ºC
    RH. max: 70%
    Particle cleanliness: ISO Class 6
    Gasket: Position: 01 – downstream, 10 – upstream.
    Configuration XPC: 2 layers of 8 panels / full size housing
    Configuration XPH: 1 layer of 8 panels / full size housing
    Outgassing: Individually outgassing tested for VOC emissions on request
    Click for More
  • CamCarb VG
    Advantages
    • Replacement items for supply recirculation air systems in industrial
    process industries
    • May be filled with various molecular filtration medias, depending on the application and contaminant(s)
    Application: Heavy duty disposable plastic Vee Cell modules to specifically treat corrosive (acidic) gases from supply air systems in process industry applications.
    Type: Vee Cell Module
    Frame: Plastic moulded
    Media: Activated Carbon
    Temperature max: 50ºC
    Options: Relative Humidity Range: 30 to 95%, depending on media selection
    Recommended face velocity: 0.5 to 1.5 m/s
    Typical pressure loss at rated velocity range: 50 to 250 Pa
    Click for More
    GigaPleat NXPP
    Advantages
    • Extremely low pressure drop
    • High media cleanliness
    • Individually VOC outgassing tested
    • Extremely small form factor
    • Wide range of dimensions
    • Multiple media types can be combined into the same filter
    Application: For clean room ceiling, Fan Filter Units, minienvironment, or process equipment
    Type: Pleated Panel
    Frame: Anodized aluminium
    Gasket: Polyurethane
    Media: Activated Carbon
    Temperature max: 40ºC
    RH. max: 70%
    Particle cleanliness: ISO Class 6
    Outgassing: Individually outgassing tested for VOC emissions.
    Knife: KU facing up, KD facing down
    Gasket: 01=Downstream gasket, 10=Upstream, 11=2 gaskets
    Faceguard: 02: Downstream faceguard; 20: Upstream faceguard, 22: 2 faceguards
    Available filter depth without knife edge: 66, 90, 110, 150, 172 and 200 mm
    Available filter depth with knife edge: 66 (+38), 90 (+38), 110 (+38), 150 (+15) mm
    Outgassing: Individually outgassing tested for VOC emissions
    Click for More
    Absolute™ CM
    Advantages
    • Compact design concept
    • Very high efficiency
    • Incinerable
    • Scannable
    Application: HEPA filter for standard applications
    Type: Box Filter
    Frame: MDF
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS): H13(≥99,95%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 800 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 70ºC
    RH. max: 100%
    Remarks: All filters scan tested acc. EN 1822
    Other options available: Galvanized frame
    Click for More
    Absolute™ DG
    Advantages
    • Rated airflow capacity of up to 3400 m³/h 610×610 (H13)
    • Halogen free
    • Low outgassing
    • Flexible in the dimensions
    • Lightweight and installation friendly
    • VDI 6022
    • Scannable
    Application: HEPA-Filter for high air flows
    Type: Box Filter
    Frame: ABS
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS): H13(≥99,95%), H14(≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 1000 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 70ºC
    RH. max: 100%
    Remarks: All filters scan tested acc. EN 1822:2009
    Click for More
  • Absolute™ CM
    Advantages
    • Compact design concept
    • Very high efficiency
    • Incinerable
    • Scannable
    Application: HEPA filter for standard applications
    Type: Box Filter
    Frame: MDF
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS): H13(≥99,95%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 800 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 70ºC
    RH. max: 100%
    Remarks: All filters scan tested acc. EN 1822
    Other options available: Galvanized frame
    Click for More
  • Absolute™ DG
    Advantages
    • Rated airflow capacity of up to 3400 m³/h 610×610 (H13)
    • Halogen free
    • Low outgassing
    • Flexible in the dimensions
    • Lightweight and installation friendly
    • VDI 6022
    • Scannable
    Application: HEPA-Filter for high air flows
    Type: Box Filter
    Frame: ABS
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS): H13(≥99,95%), H14(≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 1000 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 70ºC
    RH. max: 100%
    Remarks: All filters scan tested acc. EN 1822:2009
    Click for More
  • Absolute™ VG XL, XXL
    Advantages
    • High air flow
    • Low pressure drops
    • Optimized, compact construction
    • High efficiency
    • Halogen free
    • VDI 6022
    • Applicable up to 6000 m³/hair flow
    Application: Efficiency final filtration in air conditioning systems, housings, and diffusers
    Type: V-Bank Box Filter
    Frame: ABS
    Gasket: EPDM
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS): E10(≥85%), E11(≥95%), E12(≥99,5%), H13(≥99,95%), H14(≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 600 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: FKB, 4N, CamSafe2
    Click for More
  • Absolute™ VE XL, XXL E10-E12
    Advantages
    • High air flow
    • Applicable up to 5000 m³/h air flow
    • Low pressure drops
    • Ergonomic handle
    • Optimize the air filtration in clean rooms
    Application: HEPA filter for standard applications
    Type: V-Bank Box Filter
    Frame: Galvanised steel
    Gasket: EPDM
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS): E10(≥85%), E11(≥95%), E12(≥99,5%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 600 Pa
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: FKB, FKB/D, CamBox
    Remarks: Special versions on request (e.g., stainless steel frame or high temperature version 120ºC)
    Click for More
  • Absolute™ VE XL, XXL H13-H14
    Advantages
    • High air flow
    • Applicable up to 4000 m³/h air flow
    • Low pressure drops
    • Ergonomic handle
    • Optimize the air filtration in clean rooms
    • Individual tested acc. to EN 1822:2009
    Application: Very high efficiency final filtration in air conditioning systems, housings, and diffusers.
    Type: V-Bank Box Filter
    Frame: Galvanised steel
    Gasket: EPDM
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Synthetic resin
    EN 1822 (Efficiency @ MPPS): H13(≥99,95%), H14(≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 600 Pa
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: FKB, FKB/D, CamBox
    Remarks: Special versions on request (e.g., stainless steel frame or high temperature version 120ºC)
    Click for More
  • Absolute™ VGHF
    Advantages
    • Compact HEPA filter with header frame
    • Incinerable
    Application: High efficiency final filtration in air conditioning systems and industrial processes.
    Type: V-Bank Filter
    Frame: ABS; header frame, 25mm
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS): E11(≥95%), H13(≥99,95%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 1000 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Max. final pressure drop: 500 Pa
    Temperature max: 70ºC
    RH. max: 100%
    Remarks: All filter scan-tested acc. EN 1822:2009 and individually packed in PE-foil. Other editions on request
    Click for More
  • Absolute™ V ProSafe XL, XXL
    Advantages
    • Recommended for food beverage and life science industries
    • Hygienic product acc. to VDI6022
    • Microbial inert components acc. to ISO846
    • Food contact approved acc.to EC1935:2004
    • Free of harmful chemical components: halogen-free, bisphenol-free, formaldehyde free, phthalate-free
    • Tested resistance to decon and cleaning procedures
    • High air flow, low pressure drops
    • Individual test certificate acc. to EN1822:2009
    • Optimizing waste management:
    - Compactable
    - Incinerable
    - lightweight
    • Ideal for CREO energy optimization
    Application: EPA/HEPA final filtration for air conditioning systems of sensitive process industries like life science or food and beverage.
    Type: V-Bank Box Filter
    Frame: ABS
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS): E11(≥95%), H13(≥99,95%), H14(≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 600 Pa
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access filter frames. Terminal housings and safe change systems
    Click for More
  • Absolute™ 1D
    Advantages
    • High quality glass fibre media
    • High mechanical strength
    • Rigid design
    • High efficiency
    • High dust holding capacity
    Application: HEPA filter for standard applications
    Type: Box Filter
    Frame: Plywood
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Aluminium
    Sealant: Polyurethane
    EN 1822 (Efficiency @ MPPS):  E13(≥99,95%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 600 Pa
    Temperature max: 110ºC
    RH. max: 100%
    Mounting/Frames: FKB, FKB/D, CamBox
    Remarks: All filter tested acc. EN 1822:2009. Other editions on request
    Click for More
  • Megalam MD14, MX14, MG14 -1PU
    Advantages
    • Compliant to VDI 6022
    • Microbial inert components acc. to ISO 846
    • Tested for Food Contact acc. to EC 1935:2004
    • Free of bisphenol-A, phthalate and formaldehyde
    • Chemically resistant to inactivation and cleaning procedures
    Application: HEPA filter for clean rooms and LAF benches.
    Type: Pleated Panel
    Frame: Anodized aluminium
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Grille, Upstream: Expanded metal painted (RAL 9010)
    Grille, Downstream: Expanded metal painted (RAL 9010)
    EN 1822 (Efficiency @ MPPS): H14(≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: MD: 500 Pa, MX: 600 Pa, MG: 800 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Click for More
  • Megalam MD15, MX15, MG15 -1PU
    Advantages
    • Compliant to VDI 6022
    • Microbial inert components acc. to ISO 846
    • Tested for Food Contact acc. to EC 1935:2004
    • Free of bisphenol-A, phthalate, and formaldehyde
    • Chemically resistant to inactivation and cleaning
    procedures
    Application: ULPA filter for clean rooms and LAF benches.
    Type: Pleated Panel
    Frame: Anodized aluminium
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Grille, Upstream: Expanded metal painted (RAL 9010)
    Grille, Downstream: Expanded metal painted (RAL 9010)
    EN 1822 (Efficiency @ MPPS): U15(≥99,9995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: MD: 500 Pa, MX: 600 Pa, MG: 800 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 70ºC
    RH. max: 100%
    Remarks: Individually scan-tested acc. EN 1822:2009 with protocol and packed in PE-foil. Compliant with ProSafe** requirements. Other editions on request
    Click for More
  • Silent Hood filter MD14-HL
    Advantages
    • H14 compact filter-diffuser for clean room
    • Ready to install
    • Quiet: LW = 35 dB
    • Laminarity +/- 20%
    Application: Final filtration for clean rooms.
    Type: Hood Filter
    Frame: Anodized aluminium
    Gasket: Neoprene
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Grille, Downstream: Expanded metal painted (RAL 9010)
    EN 1822 (Efficiency @ MPPS): H14 (≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 500 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 70ºC
    RH. max: 100%
    Connection: Spigot with outer diameter 160 mm, 250 mm or 315 mm depending on the model
    Remarks: Individually scan-tested acc. EN 1822:2009 with protocol and packed in PE-foil. Other editions on request
    Click for More
  • Megalam MD14, MX14, MG14-GEL
    Advantages
    • Compliant to VDI 6022
    • Microbial inert components acc. to ISO 846
    • Tested for Food Contact acc. to EC 1935:2004
    • Free of bisphenol-A, phthalate, and formaldehyde
    • Chemically resistant to inactivation and cleaning procedures
    Application: HEPA filter for clean rooms and LAF benches.
    Type: Pleated Panel
    Frame: Anodized aluminium
    Gasket: Silicone Gel
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Grille, Upstream: Expanded metal painted (RAL 9010)
    Grille, Downstream: Expanded metal painted (RAL 9010)
    EN 1822 (Efficiency @ MPPS):  H14(≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: MD: 500 Pa, MX: 600 Pa, MG: 800 Pa
    Temperature max: 70ºC
    RH. max: 100%
    Remarks: Individually scan tested acc. EN 1822:2009 with protocol and packed in PE-foil. Compliant with ProSafe** requirements. Other editions on request
    Click for More
  • Megalam MD15, MX15, MG15 -1PU

    Advantages
    • Compliant to VDI 6022
    • Microbial inert components acc. to ISO 846
    • Tested for Food Contact acc. to EC 1935:2004
    • Free of bisphenol-A, phthalate, and formaldehyde
    • Chemically resistant to inactivation and cleaning
    procedures
    Application: ULPA filter for clean rooms and LAF benches.
    Type: Pleated Panel
    Frame: Anodized aluminium
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Grille, Upstream: Expanded metal painted (RAL 9010)
    Grille, Downstream: Expanded metal painted (RAL 9010)
    EN 1822 (Efficiency @ MPPS): H15(≥99,995%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: MD: 500 Pa, MX: 600 Pa, MG: 800 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 70ºC
    RH. max: 100%
    Remarks: Individually scan-tested acc. EN 1822:2009 with protocol and packed in PE-foil. Compliant with ProSafe** requirements. Other editions on request

    Click for More
  • Megalam Fabsafe MD, MX, MG
    Advantages
    • Developed for safe use in microelectronic cleanrooms and equipment
    • Ideal for nanoparticle filtration (100 nm)
    • High dust holding capacity
    • 100% filter scan test for guaranteed performance
    • Filter scanned according to EN1822, IEST or other required standards
    • Individual efficiency test reports
    • Zero leak guarantee
    • No organic outgassing from test aerosol
    • Low outgassing adhesives and gasket (no organic flame retardant)
    • Manufactured and packed in cleanroom environment
    Application: Microelectronic cleanrooms and equipment. Nanoparticle filtration
    Type: Pleated Panel
    Frame: Anodized aluminium
    Gasket: EPDM
    Media: Glass fibre
    Separator: Hot Melt Separator Technology
    Sealant: Polyurethane
    Grille, Upstream: Expanded metal painted
    Grille, Upstream: Expanded metal painted
    Grille, Downstream: Expanded metal painted
    Temperature max: 70ºC
    RH. max: 100%
    Test: 100% individual scan test according to EN1822, IEST RPCC007 or required standard
    Test aerosol: PSL. Oil free
    Fire rating: UL900
    Remarks: Many frame options and dimensions are available on request
    Click for More
  • Absolute™ 1FRK
    Advantages
    • 99,95% at MPPS with DEHS
    • Temperature resistant up to 350°C
    • High air flow
    • Ready to install
    • Quiet: LW = 35 dB
    • Laminarity +/- 20%
    Application: Protection for clean processes at high temperature
    Type: Box Filter
    Frame: Stainless steel
    Gasket: Glass fibre
    Media: Glass fibre
    Separator: Aluminium
    Sealant: Ceramic
    EN 1822 (Efficiency @ MPPS): H13(≥99,95%)
    Max. final pressure drop: 500 Pa
    Maximum airflow: Nominal flow rate (if not, efficiency drops)
    Temperature max: 350ºC
    RH. max: 100%
    Remarks: Please note installation and assembly instructions! Due to the different thermal expansion coefficients of the individual filter components the ceramic potting may form cracks during the tempering process. At operating temperature (350 ºC) these filters have an overall efficiency of 99,97% at 0,3 μm, leakages are possible
    Click for More
  • Absolute™ 1FRK-V
    Advantages
    • ≥99,95% at MPPS with DEHS
    • Temperature resistant up to 350ºC
    • High efficiency
    • High mechanical strength
    • High air flow
    Application: Protection for clean processes at high temperature
    Type: High temperature filter
    Frame: Reinforced stainless steel
    Gasket: Glass fibre
    Media: Glass fibre
    Separator: Aluminium
    Sealant:Ceramic
    EN 1822 (Efficiency @ MPPS):  H13(≥99,95%)
    Max. final pressure drop: 500 Pa
    Rec. final pressure drop: 2x Initial pressure drop
    Temperature max: 350ºC
    RH. max: 100%
    Remarks: Please note installation and assembly instructions! Due to the different thermal expansion coefficients of the individual filter components the ceramic potting may form cracks during the tempering process. At operating temperature (350 ºC) these filters have an overall efficiency of 99,97% at 0,3 μm, leakages are possible
    Click for More
  • Absolute™ 1FRSI
    Advantages
    • ≥99,95% at MPPS with DEHS
    • Temperature resistant up to 250ºC
    • Constant efficiency
    • High mechanical strength
    • High air flow
    Application: Protection for clean processes at high temperatures
    Type: High temperature filter
    Frame: Stainless steel
    Gasket: Silicone
    Media: Glass fibre
    Separator: Aluminium
    Sealant: Silicon HT
    EN 1822 (Efficiency @ MPPS): H13(≥99,95%)
    Rec. final pressure drop: 2x Initial pressure drop
    Max. final pressure drop: 500 Pa
    Rec. final pressure drop: 2x Initial pressure drop
    Temperature max: 250ºC
    RH. max: 100%
    Remarks: Please note the installation and assembly instructions!

    Click for More
  • Absolute™ D-Pyro H13
    Advantages
    • H13 in all Temp. ranges ≥99,95% at MPPS with DEHS
    • Temperature resistant up to 350oC
    • Patented construction
    • Zero tempering
    • ProSafe + REACH compliance
    Application: HEPA filter protection for clean processes at high temperature
    Type: High temperature filter
    Frame: Stainless steel
    Media: Glass fibre
    Separator: Stainless steel
    Sealant: Geopolymer Matrix
    EN 1822 (Efficiency @ MPPS): ≥99,97% at 0,3μm, ≥99,95% at MPPS, leak free ≥ 200 cycles
    Max. final pressure drop: ≥ 700Pa
    Temperature max: 350ºC
    Remarks: ISO 5 under all production steps. Please note installation and assembly instructions! Other editions on request (with gasket, or sizes)
    Click for More
  • Absolute™ D-Pyro H14
    Advantages
    • H14 in all Temp. ranges ≥99,995% at MPPS with DEHS
    • Temperature resistant up to 350oC
    • Patented construction
    • Zero tempering
    • ProSafe + REACH compliance
    Application:HEPA filter protection for clean processes at high temperature
    Type: High temperature filter
    Frame: Stainless steel
    Media: Glass fibre
    Separator: Stainless steel
    Sealant: Geopolymer Matrix
    EN 1822 (Efficiency @ MPPS): ≥99,997% at 0,3μm, ≥99,995% at MPPS, leak free ≥ 200 cycles
    Max. final pressure drop: ≥ 700Pa
    Temperature max: 350ºC
    Remarks: ISO 5 under all production steps. Please note installation and assembly instructions! Other editions on request (with gasket, or sizes)
    Click for More
  • GigaPleat XPC/XPH
    Advantages
    • Reduced waste through reusable housing
    • Up to 2 media types can be combined into the same filter
    • Compact solution
    • High media cleanliness
    • Exchangeable panels
    Application: Clean room recirculation air and clean room make up air
    Type: Box Filter
    Frame: Stainless steel
    Sealant: Polyurethane
    Temperature max: 40ºC
    RH. max: 70%
    Particle cleanliness: ISO Class 6
    Gasket: Position: 01 – downstream, 10 – upstream.
    Configuration XPC: 2 layers of 8 panels / full size housing
    Configuration XPH: 1 layer of 8 panels / full size housing
    Outgassing: Individually outgassing tested for VOC emissions on request
    Click for More
  • CamCarb VG
    Advantages
    • Replacement items for supply recirculation air systems in industrial
    process industries
    • May be filled with various molecular filtration medias, depending on the application and contaminant(s)
    Application: Heavy duty disposable plastic Vee Cell modules to specifically treat corrosive (acidic) gases from supply air systems in process industry applications.
    Type: Vee Cell Module
    Frame: Plastic moulded
    Media: Activated Carbon
    Temperature max: 50ºC
    Options: Relative Humidity Range: 30 to 95%, depending on media selection
    Recommended face velocity: 0.5 to 1.5 m/s
    Typical pressure loss at rated velocity range: 50 to 250 Pa
    Click for More
  • GigaPleat NXPP
    Advantages
    • Extremely low pressure drop
    • High media cleanliness
    • Individually VOC outgassing tested
    • Extremely small form factor
    • Wide range of dimensions
    • Multiple media types can be combined into the same filter
    Application: For clean room ceiling, Fan Filter Units, minienvironment, or process equipment
    Type: Pleated Panel
    Frame: Anodized aluminium
    Gasket: Polyurethane
    Media: Activated Carbon
    Temperature max: 40ºC
    RH. max: 70%
    Particle cleanliness: ISO Class 6
    Outgassing: Individually outgassing tested for VOC emissions.
    Knife: KU facing up, KD facing down
    Gasket: 01=Downstream gasket, 10=Upstream, 11=2 gaskets
    Faceguard: 02: Downstream faceguard; 20: Upstream faceguard, 22: 2 faceguards
    Available filter depth without knife edge: 66, 90, 110, 150, 172 and 200 mm
    Available filter depth with knife edge: 66 (+38), 90 (+38), 110 (+38), 150 (+15) mm
    Outgassing: Individually outgassing tested for VOC emissions
    Click for More

Prefiltration

  • Pre Filter-Media G4 – Non Woven Synthetic
    High quality pre-filter media in G2, G3
    and G4 efficiency grades for Automotive paint booth pre-filtration as well as HVAC pre-filtration to remove coarse dust particles from the air stream. The GS model pre-filter media is high lofted and rigid in nature and offers high dust holding properties and low pressure drops. HVAC applications include FCU, Packaged units, AH Us and other air intake systems.
    Click for More
    Glass Fibre Media G3
    High lofted glass fibre filter media to collect the over spray paint and
    powder particles. Thanks to its high dust holding capability. These filter media offer very low pressure drop and are available in Rolls, Cut-to size pads or Framed Filters
    Click for More
    Ceiling Filter Media F5
    The best quality Ceiling filter media for automotive paint spray
    booths and powder coating and other surface treatment lines. These filter Medias are made up of non-woven Polyester fibres with scrim backing and fully impregnated to hold the dust particles to the full depth of the media. Thanks to its high dust holding capacity and low pressure drops. These media are available in Rolls or Cut to Size Pads or fully framed filters. Ceiling Filter media is available in F5 as well as F6 efficiency grades as per EN779 Standard.
    Click for More
  • Pre Filter-Media G4 – Non Woven Synthetic
    High quality pre-filter media in G2, G3
    and G4 efficiency grades for Automotive paint booth pre-filtration as well as HVAC pre-filtration to remove coarse dust particles from the air stream. The GS model pre-filter media is high lofted and rigid in nature and offers high dust holding properties and low pressure drops. HVAC applications include FCU, Packaged units, AH Us and other air intake systems.
    Click for More
  • Glass Fibre Media G3
    High lofted glass fibre filter media to collect the over spray paint and
    powder particles. Thanks to its high dust holding capability. These filter media offer very low pressure drop and are available in Rolls, Cut-to size pads or Framed Filters
    Click for More
  • Ceiling Filter Media F5
    The best quality Ceiling filter media for automotive paint spray
    booths and powder coating and other surface treatment lines. These filter Medias are made up of non-woven Polyester fibres with scrim backing and fully impregnated to hold the dust particles to the full depth of the media. Thanks to its high dust holding capacity and low pressure drops. These media are available in Rolls or Cut to Size Pads or fully framed filters. Ceiling Filter media is available in F5 as well as F6 efficiency grades as per EN779 Standard.
    Click for More

Secondary Filtration

Bag Filters

  • City Flo M5
    Advantages
    • Double function: particle and molecular filtration
    • Can be used to upgrade existing installations
    • Ideal for filtering low concentrations of most external and internal source pollutants
    • Robust metal header frame
    • “2 in 1” filtration solution; particulate and molecular
    • Range of standard sizes
    • Rapid Adsorption Dynamics (RAD)
    Application: Particle and odour removal in Hospitals, Offices, Airports etc.
    Type: Bag Filter
    Frame: Galvanised steel
    Media: Glass fibre/Activated carbon
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: F7: 200 Pa, F9: 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 50ºC
    RH. max: 70%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
    Absolute™ DG
    Advantages
    • Combined particle and molecular filter
    • Low initial pressure drops
    • Moulded, rigid and aerodynamic shaped plastic frame
    • Conical pockets
    Application: Particulate and molecular filter.
    Type: Bag Filter
    Frame: Plastic moulded
    Media: Glass fibre/Activated carbon
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: 200 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 50ºC
    RH. max: 70%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
    Hi-Flo XLT
    Advantages
    • The latest developed glass fibre media
    • Low initial pressure drops
    • Flat pressure drop curve
    • Conical pockets
    • New developed pocket design for the best air distribution
    • Moulded, rigid and aerodynamic shaped plastic frame
    • Less energy consumption
    Application: Air conditioning applications and as pre filters for clean rooms
    Type: Bag Filter
    Frame: Plastic moulded
    Media: Glass fibre
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M5-F7: 200 Pa, F8-F9: 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available

    Click for More
    Hi – Flo XLS
    Advantages
    • The latest developed glass fibre media
    • Low initial pressure drops
    • Flat pressure drop curve
    • Conical pockets
    • New developed pocket design for the best air distribution
    • Moulded, rigid and aerodynamic shaped plastic frame
    • Less energy consumption
    Application: Air conditioning applications and as pre filters for clean rooms
    Type: Bag Filter
    Frame: Plastic moulded
    Media: Glass fibre
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M5-F7: 200 Pa, F8-F9: 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
  • Hi-Flo M
    Advantages
    • Large surface area
    • Save energy – optimised design (LCC)
    • Comprehensive range of standard sizes
    • New developed pocket design for the best air distribution
    • Conical pockets
    • Certified performance
    • CREO Approved
    Application: Air conditioning applications
    Type: Bag Filter
    Frame: Galvanised steel
    Media: Glass fibre
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M6-F7: 200 Pa, F9: 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
    HI – Flo P
    Advantages
    • Large surface area
    • Low pressure drops
    • Comprehensive range of standard sizes
    • Controlled media spacing (CMS)
    • Certified performance
    Application: Air conditioning applications
    Type: Bag Filter
    Frame: Galvanised steel
    Media: Glass fibre
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M6-F7: 200 Pa, F9: 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
    Hi-Flo A
    Advantages
    • Comprehensive range of standard sizes
    • New developed pocket design for the best air distribution
    • Conical pockets
    • Robust metal header frame
    • High dust holding capacity
    Application: Comfort air conditioning applications, pre filter applications
    Type: Bag Filter
    Frame: Galvanised steel
    Media: Glass fibre
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: 200
    Pa Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
    Hi Flo Pro Safe
    Advantages
    • Specially designed for Process Safety (Food Life Science applications)
    • The latest developed glass fibre media
    • Low initial pressure drops
    • Flat pressure drop curve
    • New developed pocket design for the best air distribution
    • Conical pockets
    • Moulded, rigid and aerodynamic shaped plastic frame
    • Less energy consumption
    • Compliant to EC 1935:2004
    • Compliant to VDI 6022 / ISO 846
    Application: Air conditioning applications and as pre filters for cleanrooms.
    Type: Bag Filter
    Frame: Plastic moulded
    Media: Glass fibre
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M6-F7: 200 Pa, F9: 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
  • CityCarb 1
    Advantages
    • Compact “2 in 1” filtration solution; particulate and molecular
    • Ideal for filtering low concentrations of most external and internal source pollutants
    • 100% incinerable
    • Can be used to upgrade existing installations
    • Range of standard sizes
    • Rapid Adsorption Dynamics (RAD)
    • Filter class F7 acc. EN 779:2012
    Application: Particle and odour removal in offices, hospitals, airports etc.
    Type: V-Bank Filter
    Frame: Polypropylene
    Media: Synthetic/Activated carbon
    Dimensions: Filter front dimensions according EN 15805
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 50ºC
    RH. max: 70%
    Mounting/Frames: Front and side access housings and frames are available
    A compact filter with an additional molecular filtration media layer to provide enhanced IAQ through combined particle filtration and gas filtration.
    CityCarb is the ultimate solution when a high-performance compact filter and a high performance molecular (gas, odour) filter must be installed in a single location. CityCarb filter can easily be fitted into new or existing standard filter frames. Particle filtration media is combined with an exclusive “Broad Spectrum” carbon media that exploits the benefits of “Rapid Adsorption Dynamics”
    (RAD)to remove a very wide range of VOCs and odours. Molecular pollutants are released from both external sources (traffic fumes, power generation, industry) and internal sources (building construction and finish materials, wooden materials, carpets, cleaning agents etc). The filter should be replaced when the pressure loss exceeds the maximum allowable value for the ventilation system or after a maximum of one year. In accordance with good practice, used CityCarb filters should be bagged immediately after removal and disposed of by the appropriate route.
    Click for More
    CityCarb E
    Advantages
    • Compact “2 in 1” filtration solution; particulate and molecular
    • Ideal for filtering low concentrations of most external and internal source pollutants
    • 100% incinerable
    • Can be used to upgrade existing installations
    • Range of standard sizes
    • Rapid Adsorption Dynamics (RAD)
    • Filter class M6 acc. EN 779:2012
    Application: Particle and odour removal in offices, hospitals, airports etc.
    Type: V-Bank Filter
    Frame: Plastic
    Media: Synthetic/Activated carbon
    Dimensions: Filter front dimensions according EN 15805
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 50ºC
    RH. max: 70%
    Mounting/Frames: Front and side access housings and frames are available
    A compact filter with an additional molecular filtration media layer to provide enhanced IAQ through combined particle filtration and gas filtration.
    CityCarb is the ultimate solution when a high-performance compact filter and a high performance molecular (gas, odour) filter must be installed in a single location. CityCarb filter can easily be fitted into new or existing standard filter frames. Particle filtration media is combined with an exclusive “Broad Spectrum” carbon media that exploits the benefits of “Rapid Adsorption Dynamics” (RAD)to remove a very wide range of VOCs and odours. Molecular pollutants are released from both external sources (traffic fumes, power generation, industry) and internal sources (building construction and finish materials, wooden materials, carpets, cleaning agents etc). The filter should be replaced when the pressure loss exceeds the maximum allowable value for the ventilation system or after a maximum of one year. In accordance with good practice, used CityCarb filters should be bagged immediately after removal and disposed of by the appropriate route.
    Click for More
    CitySorb
    Advantages
    • 100% incinerable
    • Compact filtration solution
    • Ideal for filtering low concentrations of most molecular pollutants from external and internal sources
    • Range of standard sizes
    • High efficiency
    • Large air flow capacity
    Application: Adsorption of odours and gasses in air conditioning applications.
    Type: V-Bank Filter
    Frame: Polypropylene
    Gasket: One piece PU gasket (01 in the standard version)
    Media: Activated Carbon Separator: Hot Melt Sealant: Polyurethane
    Dimensions: Filter front dimensions according EN 15805
    Temperature max: 40ºC
    RH. max: 70%
    Mounting/Frames: Front and side access housings and frames are available
    The CitySorb filter utilizes a highly effective broad spectrum carbon media to ensure removal of a very wide range of airborne chemicals.
    The broad-spectrum carbon operates with a Rapid Adsorption Dynamics (RAD) mechanism that is specifically designed to be highly efficient against the multiple chemicals that are typically present in low or moderate concentrations in city-centre buildings or other locations.
    CitySorb is an effective ozone filter with a 70% ozone removal efficiency or Oz7 ozone removal
    rating according to the unique Camfil system.
    Click for More
    CityCarb CH
    Advantages
    • Compact “2 in 1” filtration solution; particulate and molecular
    • Ideal for filtering organic acids
    • 100% incinerable
    • Can be used to upgrade existing installations
    • Range of standard sizes
    • Rapid Adsorption Dynamics (RAD)
    • Filter class F7 acc. EN 779:2012
    Application: Particle and odour removal in museums, art galleries, libraries etc.
    Type: V-Bank Filter
    Frame: Plastic
    Gasket: Polyurethane, endless foamed
    Media: Synthetic/Activated carbon
    Dimensions: Filter front dimensions according EN 15805
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 50ºC
    RH. max: 70%
    Mounting/Frames: Front and side access housings and frames are available
    A compact filter with an additional molecular filtration media layer to provide enhanced IAQ through combined particle filtration and gas filtration.
    CityCarb is the ultimate solution when a high-performance compact filter and a high performance molecular (gas, odour) filter must be installed in a single location. High efficiency particle filtration media is combined with an exclusive “targeted” molecular filtration media that exploits the benefits of “Rapid Adsorption Dynamics” (RAD) to specifically remove low molecular weight organic acids. These contaminants are unavoidably released from wood and paper-based artefacts in cultural heritage establishments due to the degradation of cellulosic polymers. As the target pollutants are from internal sources, the CityCarb CH filter should be mounted in the recirculation or return air system. CityCarb HC is also extremely effective against the external source pollutants, ozone, and nitrogen dioxide. The filter should be replaced when the pressure loss exceeds the maximum allowable value for the ventilation system or after a maximum of one year. In accordance with good practice, used CityCarb filters should be bagged immediately after removal and disposed of by the appropriate route.
    Click for More
  • Opakfil ES
    Advantages
    • Long operating life
    • Light and robust
    • Very low Energy Consumption
    • Less frequent changes
    • Certified performance optimised for LCC
    • Aerodynamic radial design
    Application: Air conditioning applications and preparatory filtration in clean rooms
    Type: V-Bank Filter Frame: ABS Media: Glass fiber
    Separator: Hot Melt
    Sealant: Polyurethane
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M6-F7: 200 Pa, F8-F9 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
    Opakfil ST
    Advantages
    • Long operating life
    • Light and robust
    • Low Energy Consumption
    • Aerodynamic radial design

    Application: Air conditioning applications
    Type: V-Bank Filter Frame: ABS Media: Glass fiber
    Separator: Hot Melt Separator Technology
    Sealant: Polyurethane
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M6-F7: 200 Pa, F8-F9 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
    Opakfil Prostate ES
    Advantages
    • Specially designed for Process Safety (Food Life Science application)
    • Food compliant – EC1935:2004
    • Anti-microbial growth certified (ISO846 – VDI6022)
    • Sealed bag for transport through clean room
    • The latest developed glass fibre media with high water repellent
    • QR code for a quick access to information and certificates
    • Lower energy costs
    • Resistance up to 5500 m3/h
    • Light and easy maintenance through handles
    • Delivered in standard with continuous PU gasket for efficiency warranty
    Application: Air conditioning applications and preparatory filtration in clean rooms.
    Type: V-Bank Filter Frame: ABS Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M5-F7: 200 Pa, F8-F9: 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Food and Beverage or Life-Science activities have set new standards in product quality and therefore require specific characteristics regarding process definition. Camfil, as the leader in clean air solutions and air filtration, has developed the complete ProSafeTM range of products designed for the most demanding processes, including safety, traceability and audits requirement.
    Click for More
    Airopac
    Advantages
    • Low pressure drops
    • Robust metal header frame
    • Large surface area
    • Rigid design concept
    • High dust holding capacity
    Application: Air conditioning applications and preparatory filtration in clean rooms.
    Type: Compact Pleated Filter Frame: Galvanised steel Gasket: Braided glass fibre Media: Glass fibre
    Separator: Aluminium Sealant: Polyurethane
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M6-F7: 200 Pa, F8-F9: 300 Pa
    Maximum airflow: 1,15 x nominal flow
    Temperature max: 110ºC
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
  • Airopac High Temp
    Advantages
    • High efficiency
    • High temperature
    • Silicon free construction
    • Compact design
    Application: Paint bake ovens and other high temperature applications
    Type: Compact Pleated Filter Frame: Galvanised steel Media: Glass fibre Separator: Aluminium
    Sealant: Glass fibre
    Grille, Upstream: Galvanised steel
    Grille, Downstream: Galvanised steel
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M6-F7: 200 Pa, F9: 300 Pa
    Temperature max: 250ºC
    Click for More
  • City Flo M5
    Advantages
    • Double function: particle and molecular filtration
    • Can be used to upgrade existing installations
    • Ideal for filtering low concentrations of most external and internal source pollutants
    • Robust metal header frame
    • “2 in 1” filtration solution; particulate and molecular
    • Range of standard sizes
    • Rapid Adsorption Dynamics (RAD)
    Application: Particle and odour removal in Hospitals, Offices, Airports etc.
    Type: Bag Filter
    Frame: Galvanised steel
    Media: Glass fibre/Activated carbon
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: F7: 200 Pa, F9: 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 50ºC
    RH. max: 70%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
  • Absolute™ DG
    Advantages
    • Combined particle and molecular filter
    • Low initial pressure drops
    • Moulded, rigid and aerodynamic shaped plastic frame
    • Conical pockets
    Application: Particulate and molecular filter.
    Type: Bag Filter
    Frame: Plastic moulded
    Media: Glass fibre/Activated carbon
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: 200 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 50ºC
    RH. max: 70%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
  • Hi-Flo XLT
    Advantages
    • The latest developed glass fibre media
    • Low initial pressure drops
    • Flat pressure drop curve
    • Conical pockets
    • New developed pocket design for the best air distribution
    • Moulded, rigid and aerodynamic shaped plastic frame
    • Less energy consumption
    Application: Air conditioning applications and as pre filters for clean rooms
    Type: Bag Filter
    Frame: Plastic moulded
    Media: Glass fibre
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M5-F7: 200 Pa, F8-F9: 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available

    Click for More
  • Hi – Flo XLS
    Advantages
    • The latest developed glass fibre media
    • Low initial pressure drops
    • Flat pressure drop curve
    • Conical pockets
    • New developed pocket design for the best air distribution
    • Moulded, rigid and aerodynamic shaped plastic frame
    • Less energy consumption
    Application: Air conditioning applications and as pre filters for clean rooms
    Type: Bag Filter
    Frame: Plastic moulded
    Media: Glass fibre
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M5-F7: 200 Pa, F8-F9: 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
  • Hi-Flo M
    Advantages
    • Large surface area
    • Save energy – optimised design (LCC)
    • Comprehensive range of standard sizes
    • New developed pocket design for the best air distribution
    • Conical pockets
    • Certified performance
    • CREO Approved
    Application: Air conditioning applications
    Type: Bag Filter
    Frame: Galvanised steel
    Media: Glass fibre
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M6-F7: 200 Pa, F9: 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
  • HI – Flo P
    Advantages
    • Large surface area
    • Low pressure drops
    • Comprehensive range of standard sizes
    • Controlled media spacing (CMS)
    • Certified performance
    Application: Air conditioning applications
    Type: Bag Filter
    Frame: Galvanised steel
    Media: Glass fibre
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M6-F7: 200 Pa, F9: 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
  • Hi-Flo A
    Advantages
    • Comprehensive range of standard sizes
    • New developed pocket design for the best air distribution
    • Conical pockets
    • Robust metal header frame
    • High dust holding capacity
    Application: Comfort air conditioning applications, pre filter applications
    Type: Bag Filter
    Frame: Galvanised steel
    Media: Glass fibre
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: 200
    Pa Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
  • Hi Flo Pro Safe
    Advantages
    • Specially designed for Process Safety (Food Life Science applications)
    • The latest developed glass fibre media
    • Low initial pressure drops
    • Flat pressure drop curve
    • New developed pocket design for the best air distribution
    • Conical pockets
    • Moulded, rigid and aerodynamic shaped plastic frame
    • Less energy consumption
    • Compliant to EC 1935:2004
    • Compliant to VDI 6022 / ISO 846
    Application: Air conditioning applications and as pre filters for cleanrooms.
    Type: Bag Filter
    Frame: Plastic moulded
    Media: Glass fibre
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M6-F7: 200 Pa, F9: 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
  • CityCarb 1
    Advantages
    • Compact “2 in 1” filtration solution; particulate and molecular
    • Ideal for filtering low concentrations of most external and internal source pollutants
    • 100% incinerable
    • Can be used to upgrade existing installations
    • Range of standard sizes
    • Rapid Adsorption Dynamics (RAD)
    • Filter class F7 acc. EN 779:2012
    Application: Particle and odour removal in offices, hospitals, airports etc.
    Type: V-Bank Filter
    Frame: Polypropylene
    Media: Synthetic/Activated carbon
    Dimensions: Filter front dimensions according EN 15805
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 50ºC
    RH. max: 70%
    Mounting/Frames: Front and side access housings and frames are available
    A compact filter with an additional molecular filtration media layer to provide enhanced IAQ through combined particle filtration and gas filtration.
    CityCarb is the ultimate solution when a high-performance compact filter and a high performance molecular (gas, odour) filter must be installed in a single location. CityCarb filter can easily be fitted into new or existing standard filter frames. Particle filtration media is combined with an exclusive “Broad Spectrum” carbon media that exploits the benefits of “Rapid Adsorption Dynamics”
    (RAD)to remove a very wide range of VOCs and odours. Molecular pollutants are released from both external sources (traffic fumes, power generation, industry) and internal sources (building construction and finish materials, wooden materials, carpets, cleaning agents etc). The filter should be replaced when the pressure loss exceeds the maximum allowable value for the ventilation system or after a maximum of one year. In accordance with good practice, used CityCarb filters should be bagged immediately after removal and disposed of by the appropriate route.
    Click for More
  • CityCarb E
    Advantages
    • Compact “2 in 1” filtration solution; particulate and molecular
    • Ideal for filtering low concentrations of most external and internal source pollutants
    • 100% incinerable
    • Can be used to upgrade existing installations
    • Range of standard sizes
    • Rapid Adsorption Dynamics (RAD)
    • Filter class M6 acc. EN 779:2012
    Application: Particle and odour removal in offices, hospitals, airports etc.
    Type: V-Bank Filter
    Frame: Plastic
    Media: Synthetic/Activated carbon
    Dimensions: Filter front dimensions according EN 15805
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 50ºC
    RH. max: 70%
    Mounting/Frames: Front and side access housings and frames are available
    A compact filter with an additional molecular filtration media layer to provide enhanced IAQ through combined particle filtration and gas filtration.
    CityCarb is the ultimate solution when a high-performance compact filter and a high performance molecular (gas, odour) filter must be installed in a single location. CityCarb filter can easily be fitted into new or existing standard filter frames. Particle filtration media is combined with an exclusive “Broad Spectrum” carbon media that exploits the benefits of “Rapid Adsorption Dynamics” (RAD)to remove a very wide range of VOCs and odours. Molecular pollutants are released from both external sources (traffic fumes, power generation, industry) and internal sources (building construction and finish materials, wooden materials, carpets, cleaning agents etc). The filter should be replaced when the pressure loss exceeds the maximum allowable value for the ventilation system or after a maximum of one year. In accordance with good practice, used CityCarb filters should be bagged immediately after removal and disposed of by the appropriate route.
    Click for More
  • CitySorb
    Advantages
    • 100% incinerable
    • Compact filtration solution
    • Ideal for filtering low concentrations of most molecular pollutants from external and internal sources
    • Range of standard sizes
    • High efficiency
    • Large air flow capacity
    Application: Adsorption of odours and gasses in air conditioning applications.
    Type: V-Bank Filter
    Frame: Polypropylene
    Gasket: One piece PU gasket (01 in the standard version)
    Media: Activated Carbon Separator: Hot Melt Sealant: Polyurethane
    Dimensions: Filter front dimensions according EN 15805
    Temperature max: 40ºC
    RH. max: 70%
    Mounting/Frames: Front and side access housings and frames are available
    The CitySorb filter utilizes a highly effective broad spectrum carbon media to ensure removal of a very wide range of airborne chemicals.
    The broad-spectrum carbon operates with a Rapid Adsorption Dynamics (RAD) mechanism that is specifically designed to be highly efficient against the multiple chemicals that are typically present in low or moderate concentrations in city-centre buildings or other locations.
    CitySorb is an effective ozone filter with a 70% ozone removal efficiency or Oz7 ozone removal
    rating according to the unique Camfil system.
    Click for More
  • CityCarb CH
    Advantages
    • Compact “2 in 1” filtration solution; particulate and molecular
    • Ideal for filtering organic acids
    • 100% incinerable
    • Can be used to upgrade existing installations
    • Range of standard sizes
    • Rapid Adsorption Dynamics (RAD)
    • Filter class F7 acc. EN 779:2012
    Application: Particle and odour removal in museums, art galleries, libraries etc.
    Type: V-Bank Filter
    Frame: Plastic
    Gasket: Polyurethane, endless foamed
    Media: Synthetic/Activated carbon
    Dimensions: Filter front dimensions according EN 15805
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 50ºC
    RH. max: 70%
    Mounting/Frames: Front and side access housings and frames are available
    A compact filter with an additional molecular filtration media layer to provide enhanced IAQ through combined particle filtration and gas filtration.
    CityCarb is the ultimate solution when a high-performance compact filter and a high performance molecular (gas, odour) filter must be installed in a single location. High efficiency particle filtration media is combined with an exclusive “targeted” molecular filtration media that exploits the benefits of “Rapid Adsorption Dynamics” (RAD) to specifically remove low molecular weight organic acids. These contaminants are unavoidably released from wood and paper-based artefacts in cultural heritage establishments due to the degradation of cellulosic polymers. As the target pollutants are from internal sources, the CityCarb CH filter should be mounted in the recirculation or return air system. CityCarb HC is also extremely effective against the external source pollutants, ozone, and nitrogen dioxide. The filter should be replaced when the pressure loss exceeds the maximum allowable value for the ventilation system or after a maximum of one year. In accordance with good practice, used CityCarb filters should be bagged immediately after removal and disposed of by the appropriate route.
    Click for More
  • Opakfil ES
    Advantages
    • Long operating life
    • Light and robust
    • Very low Energy Consumption
    • Less frequent changes
    • Certified performance optimised for LCC
    • Aerodynamic radial design
    Application: Air conditioning applications and preparatory filtration in clean rooms
    Type: V-Bank Filter Frame: ABS Media: Glass fiber
    Separator: Hot Melt
    Sealant: Polyurethane
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M6-F7: 200 Pa, F8-F9 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
  • Opakfil ST
    Advantages
    • Long operating life
    • Light and robust
    • Low Energy Consumption
    • Aerodynamic radial design

    Application: Air conditioning applications
    Type: V-Bank Filter Frame: ABS Media: Glass fiber
    Separator: Hot Melt Separator Technology
    Sealant: Polyurethane
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M6-F7: 200 Pa, F8-F9 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
  • Opakfil Prostate ES
    Advantages
    • Specially designed for Process Safety (Food Life Science application)
    • Food compliant – EC1935:2004
    • Anti-microbial growth certified (ISO846 – VDI6022)
    • Sealed bag for transport through clean room
    • The latest developed glass fibre media with high water repellent
    • QR code for a quick access to information and certificates
    • Lower energy costs
    • Resistance up to 5500 m3/h
    • Light and easy maintenance through handles
    • Delivered in standard with continuous PU gasket for efficiency warranty
    Application: Air conditioning applications and preparatory filtration in clean rooms.
    Type: V-Bank Filter Frame: ABS Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M5-F7: 200 Pa, F8-F9: 300 Pa
    Maximum airflow: 1,25 x nominal flow
    Temperature max: 70ºC
    RH. max: 100%
    Mounting/Frames: Front and side access housings and frames are available
    Food and Beverage or Life-Science activities have set new standards in product quality and therefore require specific characteristics regarding process definition. Camfil, as the leader in clean air solutions and air filtration, has developed the complete ProSafeTM range of products designed for the most demanding processes, including safety, traceability and audits requirement.
    Click for More
  • Airopac
    Advantages
    • Low pressure drops
    • Robust metal header frame
    • Large surface area
    • Rigid design concept
    • High dust holding capacity
    Application: Air conditioning applications and preparatory filtration in clean rooms.
    Type: Compact Pleated Filter Frame: Galvanised steel Gasket: Braided glass fibre Media: Glass fibre
    Separator: Aluminium Sealant: Polyurethane
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M6-F7: 200 Pa, F8-F9: 300 Pa
    Maximum airflow: 1,15 x nominal flow
    Temperature max: 110ºC
    Mounting/Frames: Front and side access housings and frames are available
    Click for More
  • Airopac High Temp
    Advantages
    • High efficiency
    • High temperature
    • Silicon free construction
    • Compact design
    Application: Paint bake ovens and other high temperature applications
    Type: Compact Pleated Filter Frame: Galvanised steel Media: Glass fibre Separator: Aluminium
    Sealant: Glass fibre
    Grille, Upstream: Galvanised steel
    Grille, Downstream: Galvanised steel
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop acc. EN 13053: M6-F7: 200 Pa, F9: 300 Pa
    Temperature max: 250ºC
    Click for More

Specialised Filter

Gas Turbine Filters

  • 30/30 GT
    Advantages
    • High mechanical strength
    • Rigid, reinforced water-resistant cardboard frame
    • Large media surface
    • Unique radial pleat design
    • Bonded into case to eliminate air bypass
    • Compact
    Application: Suitable for most areas
    Type: Pleated Panel
    Frame: Water resistant cardboard
    Media: Cotton/Synthetic
    Rec. final pressure drop: 250 Pa/1.0” wg
    Temperature max: 70ºC/158ºF
    Mounting/Frames: Universal frame or clip
    Additional information: Different clips available for mounting combinations with different filters
    The 30/30GT® has been setting the standard for G4/MERV 8 panel pre-filters. The combination of the unique media, robust construction and pleating technology makes the Camfil 30/30GT a low pressure drop pre-filter that performs well in all situations
    Click for More
    CamClose
    Advantages
    • Clip-on design
    • Optimal coalescing performance
    • High strength plastic frame
    • Downstream pleat separators
    • Can be fitted directly to a final filter
    Application: Suitable for most areas including wet and coastal
    Type: Pleated Panel
    Frame: Plastic moulded
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre, Synthetic
    Rec. final pressure drop: 400 Pa
    Temperature max: 70ºC
    Mounting/Frames: Integrated clip on / optional without clip. Separate metal clips available
    Additional information: External dimensions Std. 598x604x129
    The Camfil CamClose is primarily used as a pre-filter to extend the service life of final filters by offering low initial pressure drop and high dust capacity. The filter is especially suitable for applications in humid conditions, like tropical and coastal installations, thanks to its downstream pleat separators and built-in drainage.
    Click for More
    Cam-Flo XMGT
    Advantages
    • Non discharging synthetic media
    • Maximum surface use
    • High mechanical strength
    • Incinerable bags
    • High dust holding capacity = long life
    • Recommended choice for gas turbine pre-filtration
    Application: Installations exposed to turbulence and harsh environments
    Type: Bag Filter
    Frame: Galvanised steel
    Media: Synthetic
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop: 450 Pa
    Temperature max: 70°C
    Additional information: Available in half – and special size filters on request
    The Cam-Flo XMGT filter is a sturdy bag filter, recommended in areas where considerations for high humidity and/or turbulence is important. The filter has a synthetic fibre media with unique properties, effectively removing harmful particles from the air. Self-supporting bags and a unique design make this filter an excellent pre-filter and coalescer choice for turbomachinery applications.
    Click for More
    Cam-Flo GT Hybrid
    Advantages
    • Hybrid Technology media
    • Maximum surface use
    • High mechanical strength
    • Incinerable bags
    • High dust holding capacity = long life
    • Recommended choice for gas turbine pre-filtration
    Application: Installations exposed to turbulence and harsh environments
    Type: Bag Filter
    Frame: Galvanised steel
    Media: Hybrid Synthetic and Glass Technology
    Rec. final pressure drop: 450 Pa
    Temperature max: 70°C
    Additional information: Available in half – and special size filters on request
    The Cam-Flo Hybrid is a new generation of premium bag filters for gas turbines that utilize the breakthrough Hybrid media technology to combine glass fibre and synthetic fibres. The results are a smart solution for an extended filter life, a stable and predictable performance, and most of all, carefree operations. Self-supporting bags and a unique design make this filter an excellent pre-filter and coalescer choice for turbomachinery applications.
    Click for More
  • Cam-Flo GT HV
    Advantages
    • Non discharging synthetic media
    • Maximum surface use
    • High mechanical strength
    • Incinerable bags
    • High dust holding capacity
    • Designed for high velocity applications
    • Solid frame in stainless steel
    Application: High velocity applications. 5500-7200m³/h
    Type: Bag Filter
    Frame: Stainless steel, Galvanised steel
    Media: Synthetic
    Rec. final pressure drop: 875 Pa
    Temperature max: 70°C
    EN779-2012: efficiency: F7@4250 m³/h, M6@7200m³/h
    Additional information: Other sizes available on request
    The Cam-Flo GTX7 is an efficient air inlet filter for gas turbines, compressors and diesel engines. The Cam-Flo GTX7, in combination with the CamGuard, gives excellent filtration benefits with improved engine protection and no need for costly shutdowns.
    Click for More
    CamGuard
    Advantages
    • Allows on-line filter replacement
    • Extends filter life
    • Reduced overall TCO
    • Solid corrosion resistant frame in stainless steel
    Application: High velocity air inlet systems. Typical coastal and offshore environments
    Type: Bag Filter
    Frame: Stainless steel
    Media: Synthetic
    Temperature max: 70°C
    Additional information: Designed for use in combination with Cam- Flo GT HV
    The CamGuard is a coarse filter that is installed downstream of the Cam-Flo GTX7, allowing online filter replacement thus reducing costly downtime.
    Click for More
    Hi-Cap GT
    Advantages
    • High dust holding capacity
    • Resistant media
    • Tapered pockets
    • Low pressure drop
    • Incinerable bags
    Application: Installations exposed to turbulence and/or recurrent high humidity
    Type: Bag Filter
    Frame: Galvanised steel, Plastic moulded
    Gasket: Polyurethane
    Media: Synthetic
    Rec. final pressure drop: 250 Pa
    Temperature max: 70°C
    Hi-Cap GT is a high-quality filter, available for the removal of coarse particles. It allows for a secure and efficient filtration in industrial environments where large amounts of dust are present. Long experience and continuous R&D have optimised the product for impressive filtration at a low cost.
    Click for More
    CamGT 3V-600
    Advantages
    • Low air resistance (dP) for optimal economy
    • Ensures water drainage
    • High filtration efficiency
    • Low air resistance also in wet/ dry conditions
    • Solid HEPA frame eliminates air bypass
    • Resistant to high and extreme pressure drops
    • Suitable for all environment
    Application: All installations where safety/reliability is crucial in combination with low air resistance
    Type: Compact Pleated Filter
    Frame: Plastic moulded
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Grille, Downstream: Support grid for filter media
    Rec. final pressure drop: 600 Pa
    Temperature max: 70°C
    Burst strength: > 6250 Pa continuous wet/soaked
    The CamGT 3V-600 is built on a solid 600 mm deep frame with extended media area. The unique design provides industry-leading pressure drop and dust holding capacity ensuring optimum performance, low average pressure drop and a long filter life. The filter is also available with CamBrane media in E12 efficiency.
    Click for More
  • CamGT 4V-300
    Advantages
    • Ensures water drainage
    • High filtration efficiency
    • Low pressure drop also in wet conditions
    • Resistant to turbulence and extreme pressure drop
    • Easy mounting
    • Meets the industry’s latest and most stringent requirements
    • Water resistant media
    Application: All installations where safety/reliability is important
    Type: Compact Pleated Filter
    Frame: Plastic moulded
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Grille, Downstream: Support grid for filter media
    Rec. final pressure drop: 600 Pa
    Temperature max: 70°C
    Fire rating: Available according to DIN4102 class b2 rating on request
    Burst strength: > 6250 Pa continuous wet/soaked
    Reverse flow version: With support grid available on request
    Additional information: Also available in 1/2 and 3/4 size on request
    CamGT 4V-300 is a high efficiency air inlet filter used for second and/or third stage filtration, depending on the gas turbine air inlet system. Typical range from M6 or MERV 11 up to E12 (EPA level), for the best gas turbine protection. Also available in versions with Fire rating DIN4102 class b2, Reverse flow, half-size and 3/4 size on request.
    Click for More
    CamPGT
    Advantages
    • Low pressure drop
    • Easy mounting
    • Light weight construction
    • Improves overall filter economy
    • Fully incinerable
    Application: Suitable for demanding operating conditions like heavy polluted rural or industrial areas
    Type: Compact Pleated Filter
    Frame: Plastic moulded
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt Separator Technology
    Rec. final pressure drop: 450 Pa
    Temperature max: 70ºC
    The CamPGT is an energy efficient solution functioning as a high efficiency filter in Camfil medium velocity multistage inlet houses. It is intended for inland industrial and rural areas. Its unique geometry provides a large inlet area and optimized air flow, thus offering a lower pressure drop than industry standard for V-shaped barrier filters.
    Click for More
    CamGT Box Type Green II
    Advantages
    • Ensures water drainage
    • High filtration efficiency
    • Low pressure drop also in wet conditions
    • Resistant to turbulence and high pressure drop
    • Easy mounting
    • Water resistant media
    Application: All installations where safety/reliability is important
    Type: Compact Pleated Filter
    Frame: Plastic moulded
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt Separator Technology
    Rec. final pressure drop: 600 Pa
    Temperature max: 70°C
    Additional information: XL version available on request. Profile placed at 292 mm depth for clamping, i.e for fastener spring type C-80 CamGT Box Type Green is a high-capacity filter for turbomachinery. Thanks to the unique design, its performance is maintained in humid or wet conditions, guaranteeing a long lifetime and a good filter economy.
    CamGT Box Type Green is a high-capacity filter for turbomachinery. Thanks to the unique design, its performance is maintained in humid or wet conditions, guaranteeing a long lifetime and a good filter economy.
    Click for More
    TurboPac
    Advantages
    • Flanges on one or both sides
    • Media pack protected by face guards
    • Rigid design
    • Water repellent media
    • High dust holding capacity = long life
    Application: All installations where safety/reliability is important
    Type: Compact Pleated Filter
    Frame: Galvanised steel
    Media: Glass fiber
    Separator: Aluminium
    Rec. final pressure drop: 450 Pa
    Temperature max: 70ºC
    Additional information: XL version available on request. Profile placed at 292 mm depth for clamping; i.e for fastener spring type C-80 TurboPac barrier filters are engineered to provide optimum performance under severe turbo machinery applications such as high face velocity, turbulence and surging airflows, heavy dust and high humidity.
    TurboPac barrier filters are engineered to provide optimum performance under severe turbo machinery applications such as high face velocity, turbulence and surging airflows, heavy dust and high humidity.
    Click for More
  • CamPulse GTC
    Advantages
    • HemiPleat ™technology proven open pleat solution
    • Non discharging F9
    • Water resistant media
    • Improved dust release
    • 2 in 1 package – saves space and money
    • Optimal ability to handle daily fog and humidity
    • Helicord design for efficient pulse cleaning
    Application: For humid/dry heavy dust load areas. Our recommended choice for one-stage self-cleaning air intake systems
    Type: Pleated Cylinder
    Media: Synthetic
    Temperature max: 70º C
    Pleat: HemiPleat
    End caps: Available Galvanized steel (Standard), Powder coated, Stainless steel AISI304, Stainless steel AISI 31
    Liners: External helical cords and internal screen, secure the filter element from movement without obstruction to the pulse
    Additional information: Available in Co/Cy, Tenkay, as dimple pleat and in other dimensions on request
    Our conical-cylindrical air inlet filters are available in vertical or horizontal designs, to best suit your system of choice. With our broad range of media, including EPA filters, we can offer an air inlet pulse filter for every environment and every gas turbine inlet. Camfil CamPulse with proven HemiPleat™ technology, combined with a synthetic media, delivers valuable benefits to gas turbine operation and maintenance.
    Click for More
    CamPulse GTD
    Advantages
    • HemiPleat ™technologyproven open pleat solution
    • Non discharging F9
    • Improved dust release
    • Water resistant
    • 2 in 1 package – saves space and money
    • Helical design for efficient pulse cleaning
    Application: For desert/dry/ heavy dust load areas
    Type: Pleated Cylinder
    Media: Synthetic
    Temperature max: 70º C
    Pleat: HemiPleat
    Additional information: Available in Galvanized steel (Standard), Powder coated, Stainless steel AISI304, Stainless steel AISI 31
    Liners: External helical cords and internal screen secure the filter element from movement without obstruction to the pulse
    Test information: Tested according to ARAMCO spec. 32-SAMSS-008
    Additional information: Available in Co/Cy, Tenkay, as dimple pleat and in other dimensions on request
    Our conical-cylindrical air inlet filters are available in vertical or horizontal designs, to best suit your system of choice. With our broad range of media, including EPA filters, we can offer an air inlet pulse filter for every environment and every gas turbine inlet. Camfil CamPulse with proven HemiPleat™ technology, combined with a synthetic media, delivers valuable benefits to gas turbine operation and maintenance.

    Click for More
    CamPulse GT Polytech HE
    Advantages
    • Patented HemiPleat™ technology- proven open
    • Water repellent media protected by metal liners
    • Each filter set is shipped together in one carton
    • Galvanized metal finish
    • Self-cleaning air filter cartridges
    • Improved air distribution
    • Suitable also in high humidity conditions
    • Suitable as prefilter for filter class E10, E12
    • Increased air to cloth ratio thanks to Hemi-Pleat ™technology.
    Application: For desert/dry/ heavy dust load areas
    Type: Pleated Cylinder
    Media: Polytech HE
    Temperature max: 70º C
    Pleat: HemiPleat
    Additional information: Available as dimple pleated and in fire retardant version on request
    Click for More
    CamPulse EF
    Advantages
    • Self-cleaning air filter cartridges
    • High filtration efficiency
    • Effective dust holding capacity
    • Built-in structural strength
    • Galvanized metal finish
    • Media protected by metal liners on both sides
    Application: Desert and arctic environments
    Type: Pleated Cylinder
    Media: Synthetic
    Rec. final pressure drop: 1000
    Temperature max: 70º C
    Caps: Galvanized (Standard), stainless steel (AISI304 / 316) or powder coated
    Fire rating: Available according to DIN 4102-b2
    Holding frames: Various on request
    CamPulse filter systems are designed to protect rotating machinery in high dust load environments. The cleaning system provides continuous operation and stable pressure even in extremely dusty environments.
    Click for More
  • Tenkay
    Advantages
    • High filtration efficiency
    • Excellent energy performance
    • Long life
    • Continuous one-piece gasket
    • Factory bonded steel top and bottom headers
    • Pleated media
    • Helical cord retainer
    Application: For desert/dry/ heavy dust load areas
    Type: Pleated Cylinder
    Media: Synthetic, Polytech HE
    Rec. final pressure drop: 600
    Temperature max: 70º C
    Size: Standard 34”, 22” and 27” on request
    Additional information: Also available as CamBrane E12, Goldcone, Fires retardant and Extreme versions on request.
    The Tenkay filters for turbomachinery provide enhanced performance and longer service life, thanks to greater media utilization and more effective filtration. The HemiPleat™ separator bead opens the pleats uniformly, allowing more effective cleaning, low pressure drop and long life.
    Click for More
    CamPulse CamBrane
    Advantages
    • Water and salt resistant filter
    • Non discharging EPA filter
    • Optimized Sandwich construction for long life
    • EPA highly efficient membrane media
    • 2 in 1 package – saves space and money
    • HemiPleat ™technologyproven open pleat solution
    Application: For humid/desert/dry/ heavy dust load areas
    Type: Pleated Cylinder
    Media: Membrane
    Temperature max: 70ºC
    Pleat: HemiPleat
    End caps: Available in Galvanized steel (Standard), Power coated, Stainless steel AISI304, Stainless steel AISI 316
    Additional Information: Also available as Cylindrical/Conical
    The CamBrane combines a variety of filtration technologies into one unique composite media tailored for the tough requirements of modern gas turbines. The synthetic pre-filter layer is extremely efficient on small particles, hydrocarbons and airborne salt while the membrane layer adds a barrier to submicron particles and stops water and salt from penetrating the filter. CamBrane offers best-in class protection at lowest possible air flow restriction.
    Click for More
    HemiPleat® Gold ConeTM
    Advantages
    • Original spare for Farr Gold Series® dust collectors
    • Vertically integrated cartridge for better dust release and ease of removal and
    installation
    • Excellent energy saving performance
    • Extended Filter Life
    • High Filtration Efficiency
    • Pour in place one-piece double gasket
    Application: Air Pollution Control filter cartridge to collect dust, fumes and/or oil mist in many different industrial applications and processes
    Type: Pleated Cylinder
    Gasket: Polyurethane, endless foamed
    Separator: HemiPleat Separator Technology
    Sealant: Polyurethane
    Temperature max: 70º Operating
    Mounting/Frames: Internal GV support cage
    Filter Class: M
    • Featuring an injection molded inner cone in the center of the cartridge, cleaning is accomplished by pulse waves that emanate outward from this inner cone providing enhanced cleaning for more efficient operation, longer cartridge life and reduced service requirements.
    • The new PolyTech™ media is the most advanced pulse-cleaned media ever made, and now comes standard with a moisture resistant treatment for high humidity resistance.
    • Continuous double seal gaskets give added insurance against leaks. No other filter design gives you a double seal barrier.
    • The separation beads, NOT the media beads, contact the inner cage, protecting the media from frictional damage.
    • The HemiPleat separator bead opens up the pleats uniformly, allowing more effective cleaning and lower pressure drop.
    Click for More
    DuraPleat DPJ 145
    Advantages
    • Camfil Pleat Separator Technology
    • Low Pressure drop
    • Extended Filter Life
    • High Filtration Efficiency
    • 100% spun bond polyester
    • Pour in place one piece gasket
    • Broad design portfolio
    Application: Air Pollution Control filter cartridge to collect dust, fumes and/or oil mist in many different industrial applications and processes
    Type: Pleated Cylinder
    Gasket: Rubber
    Separator: Hot Melt Separator Technology
    Sealant: Polyurethane
    Temperature max: 80 °C
    Mounting/Frames: Perforated inner Core GV (optional Stainless steel)
    Filter Class: M
    Options: PA6 flange, 4-lug design
    DuraPleat® filters are available as a retrofit upgrade your dust collector cartridges in the most popular shapes and sizes. Camfil APC’s
    innovative pleating technology offers many valuable benefits in the operation of your dust collector.
    • Lower pressure drop through open pleat spacing improves cleaning efficiency, which will reduce energy costs through less compressed air consumption during cleaning in many applications.
    • More media available for filtration and therefore improved performance and longer life time.
    • The separation beads, NOT the media beads, contact the inner cage, protecting the media from frictional damage.
    • DuraPleat media consists of 100% spun bond polyester in a pleated design that combines the high efficiency of cellulosic and the versatility of polyfelt – resulting in a premium filter with excellent performances.
    • Ideally suited to tough applications including heavy dust loading conditions, high levels of fine particulate, and/or hygroscopic dust properties which limits the performance of cellulosic type filters.
    Click for More
  • DuraPleat DPJ 156
    Advantages
    • Camfil Pleat Separator Technology
    • Low Pressure drop
    • Extended Filter Life
    • High Filtration Efficiency
    • 100% spun bond polyester
    • Pour in place one piece gasket
    • Broad design portfolio
    Application: Air Pollution Control filter cartridge to collect dust, fumes and/or oil mist in many different industrial applications and processes
    Type: Pleated Cylinder
    Gasket: Rubber
    Separator: Hot Melt Separator Technology
    Sealant: Polyurethane
    Temperature max: 80 °C
    Mounting/Frames: Perforated inner Core GV (optional Stainless steel)
    Filter Class: M
    Options: PA6 flange, 4-lug design
    DuraPleat® filters are available as a retrofit upgrade your dust collector cartridges in the most popular shapes and sizes. Camfil APC’s innovative pleating technology offers many valuable benefits in the operation of your dust collector.
    • Lower pressure drop through open pleat spacing improves cleaning efficiency, which will reduce energy costs through less compressed air consumption during cleaning in many applications.
    • More media available for filtration and therefore improved performance and longer life time.
    • The separation beads, NOT the media beads, contact the inner cage, protecting the media from frictional damage.
    • DuraPleat media consists of 100% spun bond polyester in a pleated design that combines the high efficiency of cellulosic and the versatility of polyfelt – resulting in a premium filter with excellent performances.
    • Ideally suited to tough applications including heavy dust loading conditions, high levels of fine particulate, and/or hygroscopic dust properties which limits the performance of cellulosic type filters.
    Click for More
    DuraPleat DPJ 218
    Advantages
    • Camfil Pleat Separator Technology
    • Low Pressure drop
    • Extended Filter Life
    • High Filtration Efficiency
    • 100% spun bond polyester
    • Pour in place one piece gasket
    • Broad design portfolio
    Application: Air Pollution Control filter cartridge to collect dust, fumes and/or oil mist in many different industrial applications and processes
    Type: Pleated Cylinder
    Gasket: Rubber
    Separator: Hot Melt Separator Technology
    Sealant: Polyurethane
    Temperature max: 80 °C
    Mounting/Frames: Perforated inner Core GV (optional Stainless steel)
    Filter Class: M
    Options: PA6 flange, 4-lug design
    DuraPleat® filters are available as a retrofit upgrade your dust collector cartridges in the most popular shapes and sizes. Camfil APC’s innovative pleating technology offers many valuable benefits in the operation of your dust collector.
    • Lower pressure drop through open pleat spacing improves cleaning efficiency, which will reduce energy costs through less compressed air consumption during cleaning in many applications.
    • More media available for filtration and therefore improved performance and longer life time.
    • The separation beads, NOT the media beads, contact the inner cage, protecting the media from frictional damage.
    • DuraPleat media consists of 100% spun bond polyester in a pleated design that combines the high efficiency of cellulosic and the versatility of polyfelt – resulting in a premium filter with excellent performances.
    • Ideally suited to tough applications including heavy dust loading conditions, high levels of fine particulate, and/or hygroscopic dust properties which limits the performance of cellulosic type filters.
    Click for More
    DuraPleat DPJ 325
    Advantages
    • Camfil Pleat SeparatorTechnology
    • Low Pressure drop
    • Extended Filter Life
    • High Filtration Efficiency
    • 100% spun bond polyester
    • Pour in place one piece gasket
    • Broad design portfolio
    Application: Air Pollution Control filter cartridge to collect dust, fumes and/or oil mist in many different industrial applications and processes
    Type: Pleated Cylinder
    Gasket: Rubber
    Separator: Hot Melt Separator Technology
    Sealant: Polyurethane
    Temperature max: 80 °C
    Mounting/Frames: Perforated inner Core GV (optional Stainless steel)
    Filter Class: M
    Options: PA6 flange, 4-lug design
    DuraPleat® filters are available as a retrofit upgrade your dust collector cartridges in the most popular shapes and sizes. Camfil APC’s innovative pleating technology offers many valuable benefits in the operation of your dust collector.
    • Lower pressure drop through open pleat spacing improves cleaning efficiency, which will reduce energy costs through less compressed air consumption during cleaning in many applications.
    • More media available for filtration and therefore improved performance and longer life time.
    • The separation beads, NOT the media beads, contact the inner cage, protecting the media from frictional damage.
    • DuraPleat media consists of 100% spun bond polyester in a pleated design that combines the high efficiency of cellulosic and the versatility of polyfelt – resulting in a premium filter with excellent performances.
    • Ideally suited to tough applications including heavy dust loading conditions, high levels of fine particulate, and/or hygroscopic dust properties which limits the performance of cellulosic type filters.
    Click for More
    DuraPleat DPD 325
    Advantages
    • Camfil Pleat Separator Technology
    • Low Pressure drop
    • Extended Filter Life
    • High Filtration Efficiency
    • 100% spun bond polyester
    • Pour in place one piece gasket
    • Broad design portfolio
    Application: Air Pollution Control filter cartridge to collect dust, fumes and/or oil mist in many different industrial applications and processes
    Type: Pleated Cylinder
    Gasket: Rubber
    Separator: Hot Melt Separator Technology
    Sealant: Polyurethane
    Temperature max: 80 °C
    Mounting/Frames: Perforated inner Core GV (optional Stainless steel)
    Filter Class: M
    Options: Double open end, stainless steel, hole size tensioning, outer cage.
    DuraPleat® filters are available as a retrofit upgrade your dust collector cartridges in the most popular shapes and sizes. Camfil APC’s innovative pleating technology offers many valuable benefits in the operation of your dust collector.
    • Lower pressure drop through open pleat spacing improves cleaning efficiency, which will reduce energy costs through less compressed
    air consumption during cleaning in many applications.
    • More media available for filtration and therefore improved performance and longer life time.
    • The separation beads, NOT the media beads, contact the inner cage, protecting the media from frictional damage.
    • DuraPleat media consists of 100% spun bond polyester in a pleated design that combines the high efficiency of cellulosic and the versatility of polyfelt – resulting in a premium filter with excellent performances.
    • Ideally suited to tough applications including heavy dust loading conditions, high levels of fine particulate, and/or hygroscopic dust properties which limits the performance of cellulosic type filters.
    Click for More
  • 30/30 GT
    Advantages
    • High mechanical strength
    • Rigid, reinforced water-resistant cardboard frame
    • Large media surface
    • Unique radial pleat design
    • Bonded into case to eliminate air bypass
    • Compact
    Application: Suitable for most areas
    Type: Pleated Panel
    Frame: Water resistant cardboard
    Media: Cotton/Synthetic
    Rec. final pressure drop: 250 Pa/1.0” wg
    Temperature max: 70ºC/158ºF
    Mounting/Frames: Universal frame or clip
    Additional information: Different clips available for mounting combinations with different filters
    The 30/30GT® has been setting the standard for G4/MERV 8 panel pre-filters. The combination of the unique media, robust construction and pleating technology makes the Camfil 30/30GT a low pressure drop pre-filter that performs well in all situations
    Click for More
  • CamClose
    Advantages
    • Clip-on design
    • Optimal coalescing performance
    • High strength plastic frame
    • Downstream pleat separators
    • Can be fitted directly to a final filter
    Application: Suitable for most areas including wet and coastal
    Type: Pleated Panel
    Frame: Plastic moulded
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre, Synthetic
    Rec. final pressure drop: 400 Pa
    Temperature max: 70ºC
    Mounting/Frames: Integrated clip on / optional without clip. Separate metal clips available
    Additional information: External dimensions Std. 598x604x129
    The Camfil CamClose is primarily used as a pre-filter to extend the service life of final filters by offering low initial pressure drop and high dust capacity. The filter is especially suitable for applications in humid conditions, like tropical and coastal installations, thanks to its downstream pleat separators and built-in drainage.
    Click for More
  • Cam-Flo XMGT
    Advantages
    • Non discharging synthetic media
    • Maximum surface use
    • High mechanical strength
    • Incinerable bags
    • High dust holding capacity = long life
    • Recommended choice for gas turbine pre-filtration
    Application: Installations exposed to turbulence and harsh environments
    Type: Bag Filter
    Frame: Galvanised steel
    Media: Synthetic
    Dimensions: Filter front dimensions according EN 15805
    Rec. final pressure drop: 450 Pa
    Temperature max: 70°C
    Additional information: Available in half – and special size filters on request
    The Cam-Flo XMGT filter is a sturdy bag filter, recommended in areas where considerations for high humidity and/or turbulence is important. The filter has a synthetic fibre media with unique properties, effectively removing harmful particles from the air. Self-supporting bags and a unique design make this filter an excellent pre-filter and coalescer choice for turbomachinery applications.
    Click for More
  • Cam-Flo GT Hybrid
    Advantages
    • Hybrid Technology media
    • Maximum surface use
    • High mechanical strength
    • Incinerable bags
    • High dust holding capacity = long life
    • Recommended choice for gas turbine pre-filtration
    Application: Installations exposed to turbulence and harsh environments
    Type: Bag Filter
    Frame: Galvanised steel
    Media: Hybrid Synthetic and Glass Technology
    Rec. final pressure drop: 450 Pa
    Temperature max: 70°C
    Additional information: Available in half – and special size filters on request
    The Cam-Flo Hybrid is a new generation of premium bag filters for gas turbines that utilize the breakthrough Hybrid media technology to combine glass fibre and synthetic fibres. The results are a smart solution for an extended filter life, a stable and predictable performance, and most of all, carefree operations. Self-supporting bags and a unique design make this filter an excellent pre-filter and coalescer choice for turbomachinery applications.
    Click for More
  • Cam-Flo GT HV
    Advantages
    • Non discharging synthetic media
    • Maximum surface use
    • High mechanical strength
    • Incinerable bags
    • High dust holding capacity
    • Designed for high velocity applications
    • Solid frame in stainless steel
    Application: High velocity applications. 5500-7200m³/h
    Type: Bag Filter
    Frame: Stainless steel, Galvanised steel
    Media: Synthetic
    Rec. final pressure drop: 875 Pa
    Temperature max: 70°C
    EN779-2012: efficiency: F7@4250 m³/h, M6@7200m³/h
    Additional information: Other sizes available on request
    The Cam-Flo GTX7 is an efficient air inlet filter for gas turbines, compressors and diesel engines. The Cam-Flo GTX7, in combination with the CamGuard, gives excellent filtration benefits with improved engine protection and no need for costly shutdowns.
    Click for More
  • CamGuard
    Advantages
    • Allows on-line filter replacement
    • Extends filter life
    • Reduced overall TCO
    • Solid corrosion resistant frame in stainless steel
    Application: High velocity air inlet systems. Typical coastal and offshore environments
    Type: Bag Filter
    Frame: Stainless steel
    Media: Synthetic
    Temperature max: 70°C
    Additional information: Designed for use in combination with Cam- Flo GT HV
    The CamGuard is a coarse filter that is installed downstream of the Cam-Flo GTX7, allowing online filter replacement thus reducing costly downtime.
    Click for More
  • Hi-Cap GT
    Advantages
    • High dust holding capacity
    • Resistant media
    • Tapered pockets
    • Low pressure drop
    • Incinerable bags
    Application: Installations exposed to turbulence and/or recurrent high humidity
    Type: Bag Filter
    Frame: Galvanised steel, Plastic moulded
    Gasket: Polyurethane
    Media: Synthetic
    Rec. final pressure drop: 250 Pa
    Temperature max: 70°C
    Hi-Cap GT is a high-quality filter, available for the removal of coarse particles. It allows for a secure and efficient filtration in industrial environments where large amounts of dust are present. Long experience and continuous R&D have optimised the product for impressive filtration at a low cost.
    Click for More
  • CamGT 3V-600
    Advantages
    • Low air resistance (dP) for optimal economy
    • Ensures water drainage
    • High filtration efficiency
    • Low air resistance also in wet/ dry conditions
    • Solid HEPA frame eliminates air bypass
    • Resistant to high and extreme pressure drops
    • Suitable for all environment
    Application: All installations where safety/reliability is crucial in combination with low air resistance
    Type: Compact Pleated Filter
    Frame: Plastic moulded
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Grille, Downstream: Support grid for filter media
    Rec. final pressure drop: 600 Pa
    Temperature max: 70°C
    Burst strength: > 6250 Pa continuous wet/soaked
    The CamGT 3V-600 is built on a solid 600 mm deep frame with extended media area. The unique design provides industry-leading pressure drop and dust holding capacity ensuring optimum performance, low average pressure drop and a long filter life. The filter is also available with CamBrane media in E12 efficiency.
    Click for More
  • CamGT 4V-300
    Advantages
    • Ensures water drainage
    • High filtration efficiency
    • Low pressure drop also in wet conditions
    • Resistant to turbulence and extreme pressure drop
    • Easy mounting
    • Meets the industry’s latest and most stringent requirements
    • Water resistant media
    Application: All installations where safety/reliability is important
    Type: Compact Pleated Filter
    Frame: Plastic moulded
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt
    Sealant: Polyurethane
    Grille, Downstream: Support grid for filter media
    Rec. final pressure drop: 600 Pa
    Temperature max: 70°C
    Fire rating: Available according to DIN4102 class b2 rating on request
    Burst strength: > 6250 Pa continuous wet/soaked
    Reverse flow version: With support grid available on request
    Additional information: Also available in 1/2 and 3/4 size on request
    CamGT 4V-300 is a high efficiency air inlet filter used for second and/or third stage filtration, depending on the gas turbine air inlet system. Typical range from M6 or MERV 11 up to E12 (EPA level), for the best gas turbine protection. Also available in versions with Fire rating DIN4102 class b2, Reverse flow, half-size and 3/4 size on request.
    Click for More
  • CamPGT
    Advantages
    • Low pressure drop
    • Easy mounting
    • Light weight construction
    • Improves overall filter economy
    • Fully incinerable
    Application: Suitable for demanding operating conditions like heavy polluted rural or industrial areas
    Type: Compact Pleated Filter
    Frame: Plastic moulded
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt Separator Technology
    Rec. final pressure drop: 450 Pa
    Temperature max: 70ºC
    The CamPGT is an energy efficient solution functioning as a high efficiency filter in Camfil medium velocity multistage inlet houses. It is intended for inland industrial and rural areas. Its unique geometry provides a large inlet area and optimized air flow, thus offering a lower pressure drop than industry standard for V-shaped barrier filters.
    Click for More
  • CamGT Box Type Green II
    Advantages
    • Ensures water drainage
    • High filtration efficiency
    • Low pressure drop also in wet conditions
    • Resistant to turbulence and high pressure drop
    • Easy mounting
    • Water resistant media
    Application: All installations where safety/reliability is important
    Type: Compact Pleated Filter
    Frame: Plastic moulded
    Gasket: Polyurethane, endless foamed
    Media: Glass fibre
    Separator: Hot Melt Separator Technology
    Rec. final pressure drop: 600 Pa
    Temperature max: 70°C
    Additional information: XL version available on request. Profile placed at 292 mm depth for clamping, i.e for fastener spring type C-80 CamGT Box Type Green is a high-capacity filter for turbomachinery. Thanks to the unique design, its performance is maintained in humid or wet conditions, guaranteeing a long lifetime and a good filter economy.
    CamGT Box Type Green is a high-capacity filter for turbomachinery. Thanks to the unique design, its performance is maintained in humid or wet conditions, guaranteeing a long lifetime and a good filter economy.
    Click for More
  • TurboPac
    Advantages
    • Flanges on one or both sides
    • Media pack protected by face guards
    • Rigid design
    • Water repellent media
    • High dust holding capacity = long life
    Application: All installations where safety/reliability is important
    Type: Compact Pleated Filter
    Frame: Galvanised steel
    Media: Glass fiber
    Separator: Aluminium
    Rec. final pressure drop: 450 Pa
    Temperature max: 70ºC
    Additional information: XL version available on request. Profile placed at 292 mm depth for clamping; i.e for fastener spring type C-80 TurboPac barrier filters are engineered to provide optimum performance under severe turbo machinery applications such as high face velocity, turbulence and surging airflows, heavy dust and high humidity.
    TurboPac barrier filters are engineered to provide optimum performance under severe turbo machinery applications such as high face velocity, turbulence and surging airflows, heavy dust and high humidity.
    Click for More
  • CamPulse GTC
    Advantages
    • HemiPleat ™technology proven open pleat solution
    • Non discharging F9
    • Water resistant media
    • Improved dust release
    • 2 in 1 package – saves space and money
    • Optimal ability to handle daily fog and humidity
    • Helicord design for efficient pulse cleaning
    Application: For humid/dry heavy dust load areas. Our recommended choice for one-stage self-cleaning air intake systems
    Type: Pleated Cylinder
    Media: Synthetic
    Temperature max: 70º C
    Pleat: HemiPleat
    End caps: Available Galvanized steel (Standard), Powder coated, Stainless steel AISI304, Stainless steel AISI 31
    Liners: External helical cords and internal screen, secure the filter element from movement without obstruction to the pulse
    Additional information: Available in Co/Cy, Tenkay, as dimple pleat and in other dimensions on request
    Our conical-cylindrical air inlet filters are available in vertical or horizontal designs, to best suit your system of choice. With our broad range of media, including EPA filters, we can offer an air inlet pulse filter for every environment and every gas turbine inlet. Camfil CamPulse with proven HemiPleat™ technology, combined with a synthetic media, delivers valuable benefits to gas turbine operation and maintenance.
    Click for More
  • CamPulse GTD
    Advantages
    • HemiPleat ™technologyproven open pleat solution
    • Non discharging F9
    • Improved dust release
    • Water resistant
    • 2 in 1 package – saves space and money
    • Helical design for efficient pulse cleaning
    Application: For desert/dry/ heavy dust load areas
    Type: Pleated Cylinder
    Media: Synthetic
    Temperature max: 70º C
    Pleat: HemiPleat
    Additional information: Available in Galvanized steel (Standard), Powder coated, Stainless steel AISI304, Stainless steel AISI 31
    Liners: External helical cords and internal screen secure the filter element from movement without obstruction to the pulse
    Test information: Tested according to ARAMCO spec. 32-SAMSS-008
    Additional information: Available in Co/Cy, Tenkay, as dimple pleat and in other dimensions on request
    Our conical-cylindrical air inlet filters are available in vertical or horizontal designs, to best suit your system of choice. With our broad range of media, including EPA filters, we can offer an air inlet pulse filter for every environment and every gas turbine inlet. Camfil CamPulse with proven HemiPleat™ technology, combined with a synthetic media, delivers valuable benefits to gas turbine operation and maintenance.

    Click for More
  • CamPulse GT Polytech HE
    Advantages
    • Patented HemiPleat™ technology- proven open
    • Water repellent media protected by metal liners
    • Each filter set is shipped together in one carton
    • Galvanized metal finish
    • Self-cleaning air filter cartridges
    • Improved air distribution
    • Suitable also in high humidity conditions
    • Suitable as prefilter for filter class E10, E12
    • Increased air to cloth ratio thanks to Hemi-Pleat ™technology.
    Application: For desert/dry/ heavy dust load areas
    Type: Pleated Cylinder
    Media: Polytech HE
    Temperature max: 70º C
    Pleat: HemiPleat
    Additional information: Available as dimple pleated and in fire retardant version on request
    Click for More
  • CamPulse EF
    Advantages
    • Self-cleaning air filter cartridges
    • High filtration efficiency
    • Effective dust holding capacity
    • Built-in structural strength
    • Galvanized metal finish
    • Media protected by metal liners on both sides
    Application: Desert and arctic environments
    Type: Pleated Cylinder
    Media: Synthetic
    Rec. final pressure drop: 1000
    Temperature max: 70º C
    Caps: Galvanized (Standard), stainless steel (AISI304 / 316) or powder coated
    Fire rating: Available according to DIN 4102-b2
    Holding frames: Various on request
    CamPulse filter systems are designed to protect rotating machinery in high dust load environments. The cleaning system provides continuous operation and stable pressure even in extremely dusty environments.
    Click for More
  • Tenkay
    Advantages
    • High filtration efficiency
    • Excellent energy performance
    • Long life
    • Continuous one-piece gasket
    • Factory bonded steel top and bottom headers
    • Pleated media
    • Helical cord retainer
    Application: For desert/dry/ heavy dust load areas
    Type: Pleated Cylinder
    Media: Synthetic, Polytech HE
    Rec. final pressure drop: 600
    Temperature max: 70º C
    Size: Standard 34”, 22” and 27” on request
    Additional information: Also available as CamBrane E12, Goldcone, Fires retardant and Extreme versions on request.
    The Tenkay filters for turbomachinery provide enhanced performance and longer service life, thanks to greater media utilization and more effective filtration. The HemiPleat™ separator bead opens the pleats uniformly, allowing more effective cleaning, low pressure drop and long life.
    Click for More
  • CamPulse CamBrane
    Advantages
    • Water and salt resistant filter
    • Non discharging EPA filter
    • Optimized Sandwich construction for long life
    • EPA highly efficient membrane media
    • 2 in 1 package – saves space and money
    • HemiPleat ™technologyproven open pleat solution
    Application: For humid/desert/dry/ heavy dust load areas
    Type: Pleated Cylinder
    Media: Membrane
    Temperature max: 70ºC
    Pleat: HemiPleat
    End caps: Available in Galvanized steel (Standard), Power coated, Stainless steel AISI304, Stainless steel AISI 316
    Additional Information: Also available as Cylindrical/Conical
    The CamBrane combines a variety of filtration technologies into one unique composite media tailored for the tough requirements of modern gas turbines. The synthetic pre-filter layer is extremely efficient on small particles, hydrocarbons and airborne salt while the membrane layer adds a barrier to submicron particles and stops water and salt from penetrating the filter. CamBrane offers best-in class protection at lowest possible air flow restriction.
    Click for More
  • HemiPleat® Gold ConeTM
    Advantages
    • Original spare for Farr Gold Series® dust collectors
    • Vertically integrated cartridge for better dust release and ease of removal and
    installation
    • Excellent energy saving performance
    • Extended Filter Life
    • High Filtration Efficiency
    • Pour in place one-piece double gasket
    Application: Air Pollution Control filter cartridge to collect dust, fumes and/or oil mist in many different industrial applications and processes
    Type: Pleated Cylinder
    Gasket: Polyurethane, endless foamed
    Separator: HemiPleat Separator Technology
    Sealant: Polyurethane
    Temperature max: 70º Operating
    Mounting/Frames: Internal GV support cage
    Filter Class: M
    • Featuring an injection molded inner cone in the center of the cartridge, cleaning is accomplished by pulse waves that emanate outward from this inner cone providing enhanced cleaning for more efficient operation, longer cartridge life and reduced service requirements.
    • The new PolyTech™ media is the most advanced pulse-cleaned media ever made, and now comes standard with a moisture resistant treatment for high humidity resistance.
    • Continuous double seal gaskets give added insurance against leaks. No other filter design gives you a double seal barrier.
    • The separation beads, NOT the media beads, contact the inner cage, protecting the media from frictional damage.
    • The HemiPleat separator bead opens up the pleats uniformly, allowing more effective cleaning and lower pressure drop.
    Click for More
  • DuraPleat DPJ 145
    Advantages
    • Camfil Pleat Separator Technology
    • Low Pressure drop
    • Extended Filter Life
    • High Filtration Efficiency
    • 100% spun bond polyester
    • Pour in place one piece gasket
    • Broad design portfolio
    Application: Air Pollution Control filter cartridge to collect dust, fumes and/or oil mist in many different industrial applications and processes
    Type: Pleated Cylinder
    Gasket: Rubber
    Separator: Hot Melt Separator Technology
    Sealant: Polyurethane
    Temperature max: 80 °C
    Mounting/Frames: Perforated inner Core GV (optional Stainless steel)
    Filter Class: M
    Options: PA6 flange, 4-lug design
    DuraPleat® filters are available as a retrofit upgrade your dust collector cartridges in the most popular shapes and sizes. Camfil APC’s
    innovative pleating technology offers many valuable benefits in the operation of your dust collector.
    • Lower pressure drop through open pleat spacing improves cleaning efficiency, which will reduce energy costs through less compressed air consumption during cleaning in many applications.
    • More media available for filtration and therefore improved performance and longer life time.
    • The separation beads, NOT the media beads, contact the inner cage, protecting the media from frictional damage.
    • DuraPleat media consists of 100% spun bond polyester in a pleated design that combines the high efficiency of cellulosic and the versatility of polyfelt – resulting in a premium filter with excellent performances.
    • Ideally suited to tough applications including heavy dust loading conditions, high levels of fine particulate, and/or hygroscopic dust properties which limits the performance of cellulosic type filters.
    Click for More
  • DuraPleat DPJ 156
    Advantages
    • Camfil Pleat Separator Technology
    • Low Pressure drop
    • Extended Filter Life
    • High Filtration Efficiency
    • 100% spun bond polyester
    • Pour in place one piece gasket
    • Broad design portfolio
    Application: Air Pollution Control filter cartridge to collect dust, fumes and/or oil mist in many different industrial applications and processes
    Type: Pleated Cylinder
    Gasket: Rubber
    Separator: Hot Melt Separator Technology
    Sealant: Polyurethane
    Temperature max: 80 °C
    Mounting/Frames: Perforated inner Core GV (optional Stainless steel)
    Filter Class: M
    Options: PA6 flange, 4-lug design
    DuraPleat® filters are available as a retrofit upgrade your dust collector cartridges in the most popular shapes and sizes. Camfil APC’s innovative pleating technology offers many valuable benefits in the operation of your dust collector.
    • Lower pressure drop through open pleat spacing improves cleaning efficiency, which will reduce energy costs through less compressed air consumption during cleaning in many applications.
    • More media available for filtration and therefore improved performance and longer life time.
    • The separation beads, NOT the media beads, contact the inner cage, protecting the media from frictional damage.
    • DuraPleat media consists of 100% spun bond polyester in a pleated design that combines the high efficiency of cellulosic and the versatility of polyfelt – resulting in a premium filter with excellent performances.
    • Ideally suited to tough applications including heavy dust loading conditions, high levels of fine particulate, and/or hygroscopic dust properties which limits the performance of cellulosic type filters.
    Click for More
  • DuraPleat DPJ 218
    Advantages
    • Camfil Pleat Separator Technology
    • Low Pressure drop
    • Extended Filter Life
    • High Filtration Efficiency
    • 100% spun bond polyester
    • Pour in place one piece gasket
    • Broad design portfolio
    Application: Air Pollution Control filter cartridge to collect dust, fumes and/or oil mist in many different industrial applications and processes
    Type: Pleated Cylinder
    Gasket: Rubber
    Separator: Hot Melt Separator Technology
    Sealant: Polyurethane
    Temperature max: 80 °C
    Mounting/Frames: Perforated inner Core GV (optional Stainless steel)
    Filter Class: M
    Options: PA6 flange, 4-lug design
    DuraPleat® filters are available as a retrofit upgrade your dust collector cartridges in the most popular shapes and sizes. Camfil APC’s innovative pleating technology offers many valuable benefits in the operation of your dust collector.
    • Lower pressure drop through open pleat spacing improves cleaning efficiency, which will reduce energy costs through less compressed air consumption during cleaning in many applications.
    • More media available for filtration and therefore improved performance and longer life time.
    • The separation beads, NOT the media beads, contact the inner cage, protecting the media from frictional damage.
    • DuraPleat media consists of 100% spun bond polyester in a pleated design that combines the high efficiency of cellulosic and the versatility of polyfelt – resulting in a premium filter with excellent performances.
    • Ideally suited to tough applications including heavy dust loading conditions, high levels of fine particulate, and/or hygroscopic dust properties which limits the performance of cellulosic type filters.
    Click for More
  • DuraPleat DPJ 325
    Advantages
    • Camfil Pleat SeparatorTechnology
    • Low Pressure drop
    • Extended Filter Life
    • High Filtration Efficiency
    • 100% spun bond polyester
    • Pour in place one piece gasket
    • Broad design portfolio
    Application: Air Pollution Control filter cartridge to collect dust, fumes and/or oil mist in many different industrial applications and processes
    Type: Pleated Cylinder
    Gasket: Rubber
    Separator: Hot Melt Separator Technology
    Sealant: Polyurethane
    Temperature max: 80 °C
    Mounting/Frames: Perforated inner Core GV (optional Stainless steel)
    Filter Class: M
    Options: PA6 flange, 4-lug design
    DuraPleat® filters are available as a retrofit upgrade your dust collector cartridges in the most popular shapes and sizes. Camfil APC’s innovative pleating technology offers many valuable benefits in the operation of your dust collector.
    • Lower pressure drop through open pleat spacing improves cleaning efficiency, which will reduce energy costs through less compressed air consumption during cleaning in many applications.
    • More media available for filtration and therefore improved performance and longer life time.
    • The separation beads, NOT the media beads, contact the inner cage, protecting the media from frictional damage.
    • DuraPleat media consists of 100% spun bond polyester in a pleated design that combines the high efficiency of cellulosic and the versatility of polyfelt – resulting in a premium filter with excellent performances.
    • Ideally suited to tough applications including heavy dust loading conditions, high levels of fine particulate, and/or hygroscopic dust properties which limits the performance of cellulosic type filters.
    Click for More
  • DuraPleat DPD 325
    Advantages
    • Camfil Pleat Separator Technology
    • Low Pressure drop
    • Extended Filter Life
    • High Filtration Efficiency
    • 100% spun bond polyester
    • Pour in place one piece gasket
    • Broad design portfolio
    Application: Air Pollution Control filter cartridge to collect dust, fumes and/or oil mist in many different industrial applications and processes
    Type: Pleated Cylinder
    Gasket: Rubber
    Separator: Hot Melt Separator Technology
    Sealant: Polyurethane
    Temperature max: 80 °C
    Mounting/Frames: Perforated inner Core GV (optional Stainless steel)
    Filter Class: M
    Options: Double open end, stainless steel, hole size tensioning, outer cage.
    DuraPleat® filters are available as a retrofit upgrade your dust collector cartridges in the most popular shapes and sizes. Camfil APC’s innovative pleating technology offers many valuable benefits in the operation of your dust collector.
    • Lower pressure drop through open pleat spacing improves cleaning efficiency, which will reduce energy costs through less compressed
    air consumption during cleaning in many applications.
    • More media available for filtration and therefore improved performance and longer life time.
    • The separation beads, NOT the media beads, contact the inner cage, protecting the media from frictional damage.
    • DuraPleat media consists of 100% spun bond polyester in a pleated design that combines the high efficiency of cellulosic and the versatility of polyfelt – resulting in a premium filter with excellent performances.
    • Ideally suited to tough applications including heavy dust loading conditions, high levels of fine particulate, and/or hygroscopic dust properties which limits the performance of cellulosic type filters.
    Click for More
Copyright © 2024. All Rights Reserved. Designed & Developed by ThinkTank Creative